Honda 2016 CR-V Owner's Manual page 350

Compass Zone Selection
Models with one display
Zone Number
Models with two displays
Zone Number
1. Turn the ignition switch to ON
2. Press and hold the SETUP button until the
display shows the compass setting menu.
3. Rotate to select Zone, then press
The display shows the current zone
number.
4. Rotate to select the zone number of
your area (See Zone Map), then press
1. Press the button.
2. Select Settings.
3. Select System.
4. Select Compass.
5. Select Zone.
6. Select the zone number of your area (See
Zone Map), then select OK.
1Compass Zone Selection
w . (
The zone selection is done to compensate the
variation between magnetic north and true north.
If the calibration starts while the audio system is in
.
use, the display returns to normal after the calibration
is completed.
.
Continued
uuCompassuCompass Zone Selection
349