Customizing The Lock Settings - RCA RLED4843-UHD User Manual

Use the ▲/▼ bu ons to highlight the desired item, and
use the ◄/► bu ons to select.
Please Note:
Closed captioning is only available under AV and TV ports.
Closed captioning depends on your TV program's support. Sometimes due to the
TV channel or the signal, Closed captioning will not be available.
Restore Default Restore all se ngs in SETUP menu to factory se ngs.
Setup Wizard This option enables the TV to show you the setup wizard of the TV again.
Exit
Exit
23
4.5. Customizing the LOCK Se ngs
Select TV source for example. (Press SOURCE bu on to select TV mode)
1. Press the POWER bu on to turn the LED TV on.
2. Press the MENU bu on on the remote control to display the Main menu, and use the ◄/►
bu ons to select the LOCK.
3. Use the ▼ bu on to highlight "Enter Password" item, use the numeric keys to input 4-digital
password. A er you that, the screen will display the junior menu. A er
to exit.
NOTE: The factory password is 0000. The supervision password is 8899.
4-digital password
The LOCK menu includes the following op ons:
Use the ▼ bu on to select the "Change Password" item, then press the
Change Password
► bu on to enter into the following menu.
Input the new 4-digital password and input it again to confirm.
Allow you to turn on or off the system lock.
System Lock If you turn off the system lock, then the following items (US, Canada, RRT
Se ng and Reset RRT) will unable to use.
24
ngs, press menu
Input
Exit