Specifications; Model Ble100S - Motorola BLE100 Installation And Operation Manual

Appendix A

Specifications

Specifications are valid over the given passband and operating temperature range of −40°F to
+140°F (−40°C to +60°C). Specifications stated are worst case unless otherwise noted, and are
subject to change. Refer to the Motorola CHS web site or contact your account representative for
the latest specifications.

Model BLE100S

Specification
Passband (S-split)
Gain
Full
Operational
Flatness
52 through 1003 MHz
Level control, automatic
Gain control
Performance - reference frequency
(MHz)
at typical output (dBmV)
Channels
Crossmod
CTB
CSO
Noise figure
at 52 MHz
at 1003 MHz
Interstage equalizer, LDR/9/1G
Hum modulation
Return loss, input/output
Test points, input/output
Housing dimensions
Weight
Forward Amplifier
52 through 1003 MHz
38 dB (with SFE-100-*)
34 dB (with SFE-100-* and slope reserves)
±0.70 dB maximum
Bode board using ADU/QADU
Fixed pads, JXP-∗B
1003/550/52
45/44/37
79 analog/320 MHz digital (suppressed by 6 dB)
–70 dB
–76 dB
–71 dB
8 dB (with SFE-1) maximum
8 dB (with SFE-1) maximum
9 ±1 dB
–65 dB
16 dB minimum at operational level
20 ±1.0 dB
10.6 L × 8.0 W× 4.7 D inches (26.9 × 20.3 × 11.9 cm)
7.2 pounds (3.2 kg)
BLE100 Installation and Operation Manual