Ordering Matrix; Figure 2-2 Ble100 Ordering Matrix - Motorola BLE100 Installation And Operation Manual

2-2 Overview

Ordering Matrix

Several models of the BLE100 are available. The BLE100 is fully configured in the Motorola
factory per customer request. You can find the model name on labels on the outside of the
shipping carton, the side of the BLE100 housing, and the side of the electronics module.
Please see the Product Data Sheet on the Motorola on line Product Catalog for available models
and associated part numbers.
Figure 2-2 identifies and describes the model strings.
Figure 2-2
BLE100 ordering matrix
Key Gain
H E-GaAs (High Output w/34 dB Gain)
BLE
Key Bandpass Split
100S 5-40 MHz/52-1003 MHz
100K 5-42 MHz/54-1003 MHz
100A 5-65 MHz/85-1003 MHz
100J 5-55 MHz/70-1003 MHz
100N 5-85 MHz/105-1003 MHz
* Electronics modules available are configured for manual level control only.
The ADU must be ordered and installed separately.
Notes:
1. FTECs and 20A fuses are included in all amplifiers as standard.
2. ICS and status monitor transponders will continue to be customer configurable options.
BLE100 Installation and Operation Manual
Key
X
Key
X
Key Level Control Key
X None F
A ADU-499.25/S E15
Q QADU-609.00/S E10
Station Slope
9 dB (Fmin-1003 MHz)
Return Gain
High (24 dB)
Housing*
Standard (Full Station)
Electronics only (15 amp)
Electronics only (10 amp)