Toyota 2006 Highlander Owner's Manual page 344

Hide thumbs Also See for 2006 Highlander:

Table of Contents

terminal ("+"mark)

4. Make the cable connections in the or-

der a, b, c, d.

a. Connect the clamp of the positive

(red) jumper cable to the positive (+)

terminal on the discharged battery.

b. Connect the clamp at the other end

of the positive (red) jumper cable to

the positive (+) terminal on the booster

'06 HIGHLANDER_U (L/O 0508)

Jumper cable

terminal ("−"mark)

c. Connect the clamp of the negative

(black) jumper cable to the negative (−)

terminal on the booster battery.

d. Connect the clamp at the other end

of the negative (black) jumper cable to

a solid, stationary, unpainted, metallic

point of the vehicle with the discharged

connecting points

are shown in the following illustrations:

Connecting point for 2.4 L 4−cylinder

(2AZ−FE) engine

Connecting point for 3.3 L V6 (3MZ−FE)

Chapters

Table of Contents