Motorola WU830G User Manual page 24

CONFIGURATION
WU830G
3 To ensure that the list is current, click Refresh. The updated list
of access points is displayed.
4 Select the Network Name to which you want to connect.
5 Click Connect. Your WU830G connects to that network.
The following table describes the information provided on the Site
Monitor window:
Column Description
Heading
Network Name Displays the name of the access point.
Signal Displays the signal strength indicated by percent.
Channel Displays the channel frequency used by the
access point. The possible channels are
1 through 11.
Security Displays the security type used by the access
point. The possible options are None, WEP,
WPA-PSK, and WPA.
BSS Type Displays the network type. The possible options
are Infrastructure or Ad-Hoc.
Mode Displays the wireless mode available with the
access point. Possible modes are G or B.
MAC Displays the MAC address of the access point.
SECTION 3
3-7