Using The Cd; Programmed Track Selection; Repeat Playing - Sylvania SRCD827 Operating Instructions Manual

If you want to make it at the beginning of the current track, press the
BACK button once.
If you want it back to last track, press the BACK button twice.
If you want to listen one certain song, put the CD in the compartment,
then press the NEXT button until the LED display shows the song you
want, at last, press the Play/Pause button.

Using the CD

Programmed track selection

Make sure there is no CD playing, then display the total number of the
tracks.
Press the PROG button once, it will display "0" and the indicator will
flash.
You can press the BACK or NEXT button to choose the track you want
in the program list. Press the PROG button, then you can choose next or
last track. After that, you can press the PROG button to confirm.
(You can choose at most 20 tracks to program.)
Press the Play/Pause button and the program indicator will light up for
long, then the first track you programmed will start.
When all the tracks programmed finish playing, the CD player will stop
automatically.
If you want to cancel the songs programmed, press the OPEN/CLOSE
button, and then open the CD door.
Repeat function can work in the tracks programmed by pressing the
BACK, NEXT button.

Repeat Playing

You can set up to repeat playing all the tracks in the disc or the tracks
programmed.
EN-13