Motorola SB5100 Series User Manual page 31

Introduction Before You Begin
SB5100 Series Cable Modem User Guide
Installation & Configuration
Configuring TCP/IP in Windows 95, Windows 98 SE, or
Windows Me, continued
10
Click TCP/IP on the Network window. If there is more than one TCP/IP entry, choose
the one for the Ethernet card or USB port connected to the cable modem.
11
Click Properties. The TCP/IP window is displayed.
12
Click the IP Address tab.
13
Click Obtain an IP address automatically.
14
Click OK to accept the TCP/IP settings.
15
Click OK to close the Network window.
16
Click OK when prompted to restart your computer and click OK again.
When you complete TCP/IP configuration, go to
Windows 98 SE, or Windows Me"
Troubleshooting FAQ
"Verifying the IP Address in Windows 95,
on page 37.
Glossary License
25