Motorola SB5100 Series User Manual page 16

Introduction Before You Begin
Caution
Do not connect both the Ethernet
and USB cables to the same
computer.
Connect to either
Ethernet or USB
Computer SURFboard cable modem
SB5100 Series Cable Modem User Guide
Installation & Configuration
Cabling and Startup for a Single User, continued
6
Connect your computer to the cable modem using USB or Ethernet:
USB: Be sure the SURFboard Cable Modem CD-ROM is inserted in your CD-ROM
drive. Connect the USB cable to the USB port on the cable modem. Connect the
other end to the USB port on your computer. Then perform
Driver" on page 11.
Ethernet: Connect the provided Ethernet cable to the Ethernet connector on the
cable modem. Connect the other end to the Ethernet port on your computer.
Ethernet users do not need to set up USB.
7
Perform the procedures for
Troubleshooting FAQ
"Configuring TCP/IP" on page 22.
Glossary License
"Setting Up a USB
10