Configuration Guide
Installing the AP license through the CLI
For the RFS6000 to adopt AP300s, a license has to be installed. Obtain
the license key and then install based on the following steps:
RFS6000>en
RFS6000#conf t
RFS6000(config)#license AP <LICENSE_KEY>
Installing the AP license through the Web interface
1. Open the RFS6000 applet by entering the IP address of the
wireless switch:
http://192.168.2.103
2. In the navigation pane under
, click
.
Switch
Licenses
3. Enter the
and
as seen in the figure below.
License Key
Feature Name
4. Click the
button to install the license.
Install
8
PN: 1725-36197-001_A.doc