Econo Cool Operation - Mitsubishi Electric MSZ-GL25VGD Operating Instructions Manual

E
CONO COOL OPERATION
Press during COOL mode

ECONO COOL operation.

The unit performs swing operation vertically in various cycles according to the
temperature of airflow.
Press again to cancel ECONO COOL operation.
• ECONO COOL operation is canceled when the VANE, LONG, or
POWERFUL button is pressed.
What is "ECONO COOL"?
Swing airfl ow (change of air fl ow) makes you feel cooler than stationary airfl ow. The
set temperature and the airfl ow direction is automatically changed by the micropro-
cessor. It is possible to perform cooling operation with keeping comfort. As a result
energy can be saved.
T
IMER OPERATION (ON/OFF TIMER)
1
Press or during operation to set the timer.
(ON timer) : The unit turns ON at the set time.
(OFF timer) : The unit turns OFF at the set time.
* or blinks.
* Make sure that the current time and day are set correctly.
2
Press (Increase) and
time of timer.
Each press increases or decreases the set time by 10 minutes.
• Set the timer while or
3
Press or again to cancel timer.
Note:
• ON and OFF timers can be set together.
operations.
• If power failure occurs while ON/OFF timer is set, see
function".
page 5 to start
Page 4
(Decrease) to set the
is blinking.
mark indicates the order of timer
page 5 "Auto restart
En-8