Tilt And V Position Adjustment - Hitachi 36SDX88B Service Manual

3.1.1.2 Tilt and V Position Adjustment
Adj. point D15, D18
Preparation for adjustment Adjustment procedure
Notes
(1) Receive Cross-Hatch (I) Select D15, H Size, of adjustment
Adjust Tilt and V Position on
signal with Black Back code.
VGA4 and SVGA as well
ground of VGA3 in (2) Set data of D15 to more than 35 until with the same way.
group 1. CRT center marker can be visible.
d
Phosphor
area
<(;;~($
CRT Center marker
(3) Adjust 017 so that the center of
horizontal line meet CRT center
marker
Adjustment criterion
d
Phosphor
area
The center of
Model Ll
36SDX88B s2.0mm
(4) Adjust Tilt of both CRT center markers
and the center of horizontal line with
D18 of adjustment code.
68