Assembly - Billy Goat OS901SPS Owner's Manual

OSSP Owner's Manual

ASSEMBLY

NOTE: Items in ( ) can be referenced in the Parts Illustrations and Parts Lists on pages 11-22.
1. UNFOLD the upper handle and slide handle lock loops (item 35) into place to secure the upper handle to the lower.
2. ATTACH the bar of the foot pedal to the bracket located on the engine. Use the lock nut (item 93) from the parts bag.
3. ATTACH the pedal section to the rear of the frame between the two brackets by aligning the holes and inserting the tube
(item 201) from the parts bag.
4. TAP the two pins (item 202) into both ends of the tube installed in step 3, and using pliers, spread the cotter pins to keep
it from coming out.
5. CHECK engine oil level and fill to proper level with engine manufacturers recommended grade of oil. Make sure to adjust
the machine so that the engine is level during checking. See engine manufacturers' instruction manual.
6. CONNECT spark plug wire.
Part No 351520
93
201
6
202
Form No F020416C