Connecting To A Tv Viewing Card Slot; To Connect The Ci Card, Follow These Steps - Samsung UE40J5200 E-Manual

Connecting to a TV Viewing Card slot

"
The connection method differs depending on the model.

To connect the CI CARD, follow these steps:

Using the "CI or CI+ CARD"
To watch paid channels, the "CI or CI+ CARD" must be inserted.
"
Turn the TV off to connect or disconnect a CI card.
●
Samsung TV follow up CI+ 1.3 standard. When TV product display the "Scrambled Signal", it may
happen due to CI+ 1.3 Version inconsistency. If you have a problem, please contact Samsung Call
Centre.
●
If you don't insert the "CI or CI+ CARD", some channels will display the message "Scrambled
Signal".
●
The pairing information containing a telephone number, the "CI or CI+ CARD" ID the Host ID and
other information will be displayed in about 2~3 minutes. If an error message appears please
contact your service provider.
●
When the configuration of channel information has finished, the message "Updating Completed"
appears indicating the channel list is updated.
Requirements:
●
You must obtain a "CI or CI+ CARD" from a local cable service provider.
●
When removing the "CI or CI+ CARD", carefully pull it out with your hands since dropping the "CI
or CI+ CARD" may cause damage to it.
●
Insert the "CI or CI+ CARD" in the direction marked on the card.
●
The location of the
●
"CI or CI+ CARD" is not supported in some countries and regions; check with your authorised
dealer.
●
If you have any problems, please contact a service provider.
●
Insert the "CI or CI+ CARD" that supports the current aerial settings. The screen will be distorted
or will not be seen.
COMMON INTERFACE
slot may be different depending on the model.