Table of Contents

Advertisement

QQ
3 7 63 1515 0

SERVICE MANUAL

Ver. 1.1 2007.10
• HCD-IS10 is the DVD system, tuner
and video section in DAV-IS10.
• In this set, repair in the sate of having
connected with SA-WSIS10.
This product incorporates copyright protection technology that is protected by
U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
This system incorporates with Dolby* Digital and Dolby Pro Logic (II)
adaptive matrix surround decoder and the DTS** Digital Surround System.
* Manufactured under license from Dolby Laboratories.
TE
L 13942296513
"Dolby," "Pro Logic," and the double-D symbol are trademarks of Dolby Laboratories.
** Manufactured under license from DTS, Inc.
"DTS" and "DTS Digital Surround" are registered trademarks of DTS, Inc.
DVD system
Laser
Signal format system
Tuner section
System
FM tuner section
Tuning range
Antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
AM tuner section
Tuning range
www
Antenna (aerial)
Intermediate frequency
.
Sony Corporation
9-887-730-02
Home Audio Division
2007J05-1
Published by Sony Techno Create Corporation
© 2007.10
http://www.xiaoyu163.com
Semiconductor laser
(DVD: λ = 645 - 660 nm) (CD: λ = 770 - 800 nm)
Emission duration: continuous
US, Canadian and Latin American models: NTSC
European model: PAL/NTSC
Other models: NTSC/PAL
PLL quartz-locked digital synthesizer
US and Canadian models:
87.5 − 108.0 MHz (100kHz step)
Other models: 87.5 − 108.0 MHz (50kHz step)
FM wire antenna (aerial)
10.7 MHz
US, Canadian, Australian and Latin American models:
531 − 1,710kHz (with the interval set at 9kHz)
530 − 1,710kHz (with the interval set at 10kHz)
European and Saudi Arabian models:
531 − 1,602kHz (with the interval set at 9kHz)
Other models:
531 − 1,602kHz (with the interval set at 9kHz)
530 − 1,610kHz (with the interval set at 10kHz)
AM loop antenna (aerial)
450 kHz
x
ao
u163
y
i
http://www.xiaoyu163.com
HCD-IS10
2 9
8
Model Name Using Similar Mechanism
DVD Mechanism Type
Optical Pick-up Block Name
Q Q
3
6 7
1 3
1 5
SPECIFICATIONS
Video section
Outputs
Control unit
Dimensions (approx.)
Mass (approx.)
Power output
Design and specifications are subject to change without notice.
co
.
9 4
2 8
US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Chinese Model
NEW
CDM86A-DVBU101
KHM-313CAB
0 5
8
2 9
9 4
2 8
VIDEO: 1 Vp-p 75 ohms
COMPONENT: Y: 1 Vp-p 75ohms
P
/C
, P
/C
: 0.7Vp-p 75 ohms
B
B
R
R
HDMI OUT: Type A (19 pin)
215 × 105 × 207 mm (8
× 4
× 8
1
1
/
/
2
4
(w/h/d)
3.0 kg (6 lb 10 oz)
Except Latin American model:
(DIGITAL MEDIA PORT) DC OUT: 5 V, 700 mA
m
DVD RECEIVER
9 9
9 9
1
/
inches)
4

Advertisement

Table of Contents
loading

Summary of Contents for Sony HD-IS10

  • Page 1: Service Manual

    531 − 1,602kHz (with the interval set at 9kHz) 530 − 1,610kHz (with the interval set at 10kHz) Antenna (aerial) AM loop antenna (aerial) DVD RECEIVER Intermediate frequency 450 kHz u163 Sony Corporation 9-887-730-02 Home Audio Division 2007J05-1 Published by Sony Techno Create Corporation © 2007.10 http://www.xiaoyu163.com...
  • Page 2: Self Diagnosis Function

    LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
  • Page 3: Table Of Contents

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 TABLE OF CONTENTS EXPLODED VIEWS SERVICING NOTES ..........4 7-1. Bottom Cover Section ............. 63 7-2. Panel (Top) Section ............64 GENERAL ..............8 7-3. MAIN Board Section ............65 7-4. Chassis Section ............... 66 DISASSEMBLY 7-5.
  • Page 4: Servicing Notes

    http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 SECTION 1 3 7 63 1515 0 SERVICING NOTES RELEASING THE DEMO PLAY LOCK NOTES ON HANDLING THE OPTICAL PICK-UP Releasing Procedure : BLOCK OR BASE UNIT 1. Press the button to turn on the system. The laser diode in the optical pick-up block may suffer electrostatic 2.
  • Page 5: About This Manual

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 Music discs encoded with About This Manual Note about CDs/DVDs copyright protection The system can play CD-ROMs/CD-Rs/CD- technologies • The instructions in this manual describe the RWs recorded in the following formats: controls on the remote. You can also use the This product is designed to play back discs that −...
  • Page 6 http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 HOW TO EJECT THE DISC WHEN POWER SWITCH TURNS OFF disc Turn the gear (IDL-B) to the direction of the arrow. DVD mechanism deck – Bottom view – MAIN BOARD SERVICE POSITION • In checking the MAIN board, prepare three extension jigs (J-2501-086-A: 19 cores, 300 mm/J-2501-244-A: 21 cores, 300 mm/ J-2501-102-A: 13 cores, 300 mm).
  • Page 7 http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 DVD MECHANISM DECK SERVICE POSITION • In checking the DVD mechanism deck, prepare two extension jigs (J-2501-086-A: 19 cores, 300 mm/J-2501-102-A: 13 cores, 300 mm). REG board MAIN board Connect jig (extension cable J-2501-086-A) to the MAIN board (CN105) and wire (flat type) (19core).
  • Page 8: General

    http://www.xiaoyu163.com HCD-IS10 SECTION 2 This section is extracted from instruction manual. GENERAL 3 7 63 1515 0 Front panel Rear panel FUNCTION VOLUME DMPORT A AM terminals B TV (AUDIO IN) jacks C HDMI OUT jack D ECM-AC2 jack A Soft-touch buttons ( /FUNCTION/VOLUME –/+) E TV (DIGITAL IN OPTICAL) jack B Remote sensor...
  • Page 9 http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 Remote control X [/1 (on/standby) A TV [/1 (on/standby) Y DISPLAY B TV button/TV mode indicator Z TV INPUT C Z (eject) 1) 3) D SLEEP wj ENTER E Number buttons 2) 3) wk SOUND FIELD F CLEAR wl DVD MENU...
  • Page 10: Disassembly

    http://www.xiaoyu163.com HCD-IS10 SECTION 3 DISASSEMBLY 3 7 63 1515 0 • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW Note 1: The process described in can be performed in any order. Note 2: Without completing the process described in , the next process can not be performed.
  • Page 11: Cover (Bottom) Assy

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 Note: Follow the disassembly procedure in the numerical order given. – bottom view – 3-2. COVER (BOTTOM) ASSY 1 four screws (BVTP3 × 8) 2 cover (bottom) assy sheet Note: Please spread a seat under a set not to injure panel (top) assy.
  • Page 12: Panel (Side-L/R) Assy

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 3-4. PANEL (SIDE-L/R) ASSY 3 screws (BVTP3 × 8) 4 panel (side-R) assy 5 screws (BVTP3 × 8) 1 three screws (BVTP3 × 8) 2 cover (rear) assy 6 panel (side-L) assy – back view – 3-5.
  • Page 13: Main Board

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 3-6. MAIN BOARD qd four screws (BVTP3 × 8) qf MAIN board qs wire (flat type) (13 core) (CN106) 5 wire (flat type) (CN102) (9 core: except AEP, UK, Russian models)/ 0 wire (flat type) (9 core) (CN101) (11 core: AEP, UK, Russian models) (CN110) qa wire (flat type) (11 core)
  • Page 14: Reg Board

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 3-8. REG BOARD 5 connector (CN702) 0 connector (CN710) qa REG board 4 shield plate (side-L) – back view – 9 connector (CN708) 6 connector (CN111) 7 two screws (BVTP3 × 8) 1 screw 3 two screws (BVTP3 ×...
  • Page 15: Front Panel Block

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 3-10. FRONT PANEL BLOCK US, Canadian 2 insulating sheet (motor) 3 two screws (BVTP3 × 8) 1 screw (BVTP3 × 8) 4 shield plate (side-L) 5 wire (flat type) (11 core) (CN109) 6 three screws (BVTP3 ×...
  • Page 16: Md (86A) Assy

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 3-12. MD (86A) ASSY 1 two claws 7 MD (86A) assy 5 two insulators 5 two insulators 4 two insulator screws 4 two insulator screws 6 optical pick-up block (KHM-313CAB) 2 FFC holder 3 wire (flat type) (24 core) L 13942296513 3-13.
  • Page 17: Holder (Bu) Assy

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 3-14. HOLDER (BU) ASSY 1 screw (B2.6 × 8) 2 lever (CL UP2) 6 holder (BU) assy 4 LHL support 5 floating screw (PTPWH M2.6) 3 two screws (B2 × 6) 5 floating screw (PTPWH M2.6) 3-15.
  • Page 18: Close Lever

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 3-16. CLOSE LEVER 1 washer (3-1-0.4) 5 close lever 3 claw 2 SPR-E lever close 4 shaft disc stop L 13942296513 3-17. LEVER (DIR), GEAR (IDL-B) 3 nylon washer 1.7 2 claw 4 pulley (gear) washer 5 gear (cap) 6 gear (IDL-A)
  • Page 19: Chassis (Top)

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 3-18. CHASSIS (TOP) 4 three screws 1 screw (B2.6 × 8) (B2.6 × 8) 3 two screws (B2 × 10) 2 lever (CL UP2) 5 chassis (top) L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 20: Lever (Loading-L/R)

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 3-19. LEVER (LOADING-L/R) SPT-T (loading-R) SPR-T (loading-L) 5 lever (loading-R) L 13942296513 2 two hooks 4 two hooks 3 lever (loading-L) PRECAUTION DURING LEVER (LOADING R / L) INSTALLATION BOTTOM VIEW Align the horizontal position. lever (loading-L) lever (loading-R) Install the both levers so that they move symmetrically.
  • Page 21: Lever (Disc Senser)/(Disc Stop)

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 3-20. LEVER (DISC SENSOR)/(DISC STOP) 1 gear (cap) 2 gear (IDL-L) PRECAUTION DURING DISC STOP LEVER INSTALLATION chassis (top) hole 5 two hooks 3 two claws lever (disc stop) 6 lever (disc stop) hole Install the lever (disc stop) so that the both holes 4 lever (disc sensor)
  • Page 22: Test Mode

    http://www.xiaoyu163.com HCD-IS10 SECTION 4 TEST MODE 3 7 63 1515 0 1. TEST MODES OTHER THAN THE TEST MENU 1-5. Disc Slot Lock This mode let you lock the disc slot. When this mode is activated, These are executable test mode even if not entering the test menu. the disc will not eject when the button is pressed.
  • Page 23 http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 2-2. AMP Test 7. The message “DMPORT OK.” appears on the fluorescent The cold reset clears data except DVD data stored in the RAM to indicator tube and enter the digital media port test mode. initial conditions.
  • Page 24 http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 3. DVD SERVICE MODE Manual Adjust 3-1. DVD Service Mode General Description 1. Track Balance Adjust: This mode let you make diagnosis and adjustment easily by using 2. Track Gain Adjust: the remote commander and the TV screen. The instructions, 3.
  • Page 25 http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 To Clear the Laser Hour 2. You can check the total time when the laser is turned on during Press the [ DISPLAY] button on the remote commander and then playback of DVD and CD from the above menu. The maximum press the [CLEAR] button on the remote commander.
  • Page 26 http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 3-5. Checking Version Information To check the version information, please follow the following procedure. Procedure: 1. From the top menu of Remocon Diagnosis Menu, select “4. Version Information” by pressing the [4] button on the remote commander.
  • Page 27: Electrical Adjustments

    http://www.xiaoyu163.com HCD-IS10 SECTION 5 ELECTRICAL ADJUSTMENTS 3 7 63 1515 0 DVD SECTION TUNER SECTION When the base unit is replaced, perform the adjustment and the FM TUNE LEVEL CHECK measurement as shown below in this order. signal EXECUTING IOP MEASUREMENT (See page 25) generator Procedure: 1.
  • Page 28 http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 MEMO L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 29: Diagrams

    http://www.xiaoyu163.com HCD-IS10 SECTION 6 3 7 6 3 1 5 1 5 0 DIAGRAMS 6-1. BLOCK DIAGRAM – DVD SERVO, VIDEO Section – • SIGNAL PATH (Page 30) DVDRFIP SPDIF 216 SPDIF : CD PLAY VOA/A ACLK 211 : DVD PLAY VOB/B ALRCK 209 VOC/C...
  • Page 30: Block Diagram - Main, Hdmi Section

    http://www.xiaoyu163.com HCD-IS10 3 7 6 3 1 5 1 5 0 6-2. BLOCK DIAGRAM – MAIN, HDMI Section – CN107 • R-CH is omitted due to same as L-CH. (TO SA-WSIS10) • SIGNAL PATH J903 SAT/CABLE LEVEL DIGITAL IN : AUDIO 2 RX0 TX 23 SHIFT...
  • Page 31: Block Diagram - Panel, Power Supply Section

    http://www.xiaoyu163.com HCD-IS10 3 7 6 3 1 5 1 5 0 6-3. BLOCK DIAGRAM – PANEL, POWER SUPPLY Section – FLUORESCENT INDICATOR SYSTEM CONTROLLER TUBE DRIVER IC101 (3/3) IC802 C825, R813 OSC0 OSC1 ND801 CN702 FLUORESCENT (TO SA-WSIS10) INDICATOR 68 FL_D_OUT TUBE 67 FL_CLK REGULATOR...
  • Page 32 http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 3 7 6 3 1 5 1 5 0 • Note for Printed Wiring Boards and Schematic Diagrams • Circuit Boards Location Note on Printed Wiring Board: Note on Schematic Diagram: IO board • X : parts extracted from the component side. •...
  • Page 33: Schematic Diagram - Dvd Section (1/5)

    http://www.xiaoyu163.com HCD-IS10 3 7 6 3 1 5 1 5 0 • See page 50 for Waveforms. • See page 54 for IC Pin Function Description. 6-4. SCHEMATIC DIAGRAM – DVD Section (1/5) – FB123 DMB-IVHD BOARD (1/5) R1104 4.7k IC111 OSC BUFFER R159...
  • Page 34: Schematic Diagram - Dvd Section (2/5)

    http://www.xiaoyu163.com HCD-IS10 • See page 50 for IC Block Diagrams. 6-5. SCHEMATIC DIAGRAM – DVD Section (2/5) – 3 7 6 3 1 5 1 5 0 IC110 DMB-IVHD BOARD (2/5) +1.8V REGULATOR IC110 MM1661JTRE R1134 SW+3.3V DMB-IVHD SW+5V BOARD FB112 (3/5) (Page 35)
  • Page 35: Schematic Diagram - Dvd Section (3/5)

    http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 6-6. SCHEMATIC DIAGRAM – DVD Section (3/5) – 3 7 6 3 1 5 1 5 0 DMB-IVHD BOARD (3/5) (Page 37) SW+9V R5001 (US,CND,E32,AR) DMB-IVHD BOARD SW+5V (5/5) R5002 SW+3.3V (AEP,RU,UK,EA,AUS) R5003 SW+5V (SP,TW,TH,CH) DMB-IVHD BOARD SW+3.3V (2/5)
  • Page 36: Schematic Diagram - Dvd Section (4/5)

    http://www.xiaoyu163.com HCD-IS10 3 7 6 3 1 5 1 5 0 6-7. SCHEMATIC DIAGRAM – DVD Section (4/5) – DMB-IVHD BOARD (4/5) RF+3.3V REG02 R231 R230 R223 R225 R232 100k 100k DMB-IVHD FCS- BOARD FCS- (2/5) FCS+ FCS+ (Page 34) R233 TRK+ C211...
  • Page 37: Schematic Diagram - Dvd Section (5/5)

    http://www.xiaoyu163.com HCD-IS10 3 7 6 3 1 5 1 5 0 • See page 50 for IC Block Diagrams. • See page 54 for IC Pin Function Description. 6-8. SCHEMATIC DIAGRAM – DVD Section (5/5) – DMB-IVHD BOARD (5/5) SW+9V SW+3.3V DMB-IVHD R736...
  • Page 38: Printed Wiring Boards - Dvd Section (1/2)

    http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 • See page 32 for Circuit Boards Location. 6-9. PRINTED WIRING BOARDS – DVD Section (1/2) – : Uses unleaded solder. 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location MAIN BOARD (Page 40) CN106...
  • Page 39: Printed Wiring Board - Dvd Section (2/2)

    http://www.xiaoyu163.com HCD-IS10 • See page 32 for Circuit Boards Location. 6-10. PRINTED WIRING BOARD – DVD Section (1/2) – : Uses unleaded solder. 3 7 6 3 1 5 1 5 0 • Semiconductor Location Ref. No. Location DMB-IVHD BOARD (SIDE B) IC105 IC107...
  • Page 40: Main Board (Component Side)

    http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 3 7 6 3 1 5 1 5 0 • See page 32 for Circuit Boards Location. : Uses unleaded solder. 6-11. PRINTED WIRING BOARD – MAIN Board (Component Side) – MAIN BOARD (CHASSIS) (CHASSIS) (Page 38) DMB-IVHD BOARD (COMPONENT SIDE) CN109...
  • Page 41: Printed Wiring Board - Main Board (Conductor Side)

    http://www.xiaoyu163.com HCD-IS10 3 7 6 3 1 5 1 5 0 • See page 32 for Circuit Boards Location. : Uses unleaded solder. 6-12. PRINTED WIRING BOARD – MAIN Board (Conductor Side) – MAIN BOARD (CONDUCTOR SIDE) R170 (E32, AR) 1 3 9 4 2 2 9 6 5 1 3 C255 C254...
  • Page 42: Schematic Diagram - Main Board (1/2)

    http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 • See page 50 for Waveforms. • See page 50 for IC Block Diagrams. • See page 54 for IC Pin Function Description. 6-13. SCHEMATIC DIAGRAM – MAIN Board (1/2) – 3 7 6 3 1 5 1 5 0 MAIN BOARD (1/2) R328...
  • Page 43: Schematic Diagram - Main Board (2/2)

    http://www.xiaoyu163.com HCD-IS10 • See page 50 for Waveforms. • See page 54 for IC Pin Function Description. 6-14. SCHEMATIC DIAGRAM – MAIN Board (2/2) – 3 7 6 3 1 5 1 5 0 CN108 MAIN BOARD (2/2) C224 PSOC_7V PSOC_GND P_CONT_TS P_CONT_TS...
  • Page 44: Printed Wiring Board - Io Board

    http://www.xiaoyu163.com HCD-IS10 6-15. PRINTED WIRING BOARD – IO Board – • See page 32 for Circuit Boards Location. : Uses unleaded solder. 3 7 6 3 1 5 1 5 0 IO BOARD IO BOARD (COMPONENT SIDE) (CONDUCTOR SIDE) J901 COMPONENT VIDEO OUT J902...
  • Page 45: Schematic Diagram - Io Board

    http://www.xiaoyu163.com HCD-IS10 6-16. SCHEMATIC DIAGRAM – IO Board – 3 7 6 3 1 5 1 5 0 IO BOARD J901 COMPONENT VIDEO OUT CN901 J902 VIDEO VIDEO OUT J903 SAT/CABLE CVBS DIGITAL IN COAXIAL R904 C902 SAT/CABLE(COAX) R906 IC901 D3.3V MAIN R901...
  • Page 46: Printed Wiring Board - Fl Board

    http://www.xiaoyu163.com HCD-IS10 • See page 32 for Circuit Boards Location. 6-17. PRINTED WIRING BOARD – FL Board – : Uses unleaded solder. 3 7 6 3 1 5 1 5 0 FL BOARD (COMPONENT SIDE) C802 R801 C801 C839 CN805 IC803 MAIN R819...
  • Page 47: Schematic Diagram - Fl Board

    http://www.xiaoyu163.com HCD-IS10 • See page 50 for Waveforms. • See page 50 for IC Block Diagrams. 6-18. SCHEMATIC DIAGRAM – FL Board – 3 7 6 3 1 5 1 5 0 FL BOARD ND801 FLUORESCENT INDICATOR TUBE 10 11 12 23 24 49 50 C832...
  • Page 48: Printed Wiring Board - Reg Board

    http://www.xiaoyu163.com HCD-IS10 • See page 32 for Circuit Boards Location. 6-19. PRINTED WIRING BOARD – REG Board – : Uses unleaded solder. 3 7 6 3 1 5 1 5 0 REG BOARD (COMPONENT SIDE) REG BOARD (CONDUCTOR SIDE) ET702 (CHASSIS) IC704 C719...
  • Page 49: Schematic Diagram - Reg Board

    http://www.xiaoyu163.com HCD-IS10 • See page 50 for IC Block Diagrams. 6-20. SCHEMATIC DIAGRAM – REG Board – 3 7 6 3 1 5 1 5 0 CN710 CN712 (NC) DMB-IVHD +3.3V +3.3V BOARD V2REF0 V2REF0 (2/5) CN105 RFMON RFMON (Page 34) (EXCEPT E32,AR) CN708 REG BOARD...
  • Page 50: Http://Www.xiaoyu163.Com

    http://www.xiaoyu163.com HCD-IS10 3 7 6 3 1 5 1 5 0 • Waveforms • IC Block Diagrams – DMB-IVHD Board – – DMB-IVHD Board – – MAIN Board – – FL Board – IC105, 107, 703 TK11133CSCL-G IC101 <z,x (R/Cr/Pr) IC101 <xz/ (ABCK) IC201 ws (XTO) T801 2...
  • Page 51: Http://Www.xiaoyu163.Com

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 – MAIN Board – IC201 AK4683EQ 62 61 60 59 58 57 56 55 54 53 52 50 49 64 63 RISEL PVDD ROPIN LOPIN INPUT CLOCK PRE-AMP SELECTOR RECOVERY DIGITAL LISEL AUDIO INTERFACE ANALOG DIGITAL CONVERTER DECODER...
  • Page 52: Ao Y

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 IC251 BH7868FS-E2 6MHz VCC1 75Ω 32 C OUT S-DC OUT 31 S-DC OUT S1/S2 C IN BIAS MUTE1 MUTE1 6MHz 75Ω CV OUT CV IN CLAMP CV OUT SAG SEL (CV/MIX) 6MHz Y IN CLAMP 75Ω...
  • Page 53: Http://Www.xiaoyu163.Com

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 – FL Board – IC802 ML9208-03MBZ03B 64 VDD 63 DA 8 BIT SHIFT 62 CP REGISTER 61 CS 60 RESET COMMAND PORT DECODER DRIVER CONTROL CIRCUIT DRIVER ADRAM 16W × 2B TIMING TIMING GENERATOR2 GENERATOR1 CGRAM...
  • Page 54 http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 • IC Pin Function Description DMB-IVHD BOARD IC101 CXD9889R (RF AMP, SERVO DSP, MPEG DECODER) Pin No. Pin Name Description AGND Ground terminal DVDA AC coupled input path A DVDB AC coupled input path B DVDC AC coupled input path C DVDD...
  • Page 55: Http://Www.xiaoyu163.Com

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 Pin No. Pin Name Description USB_VDD3 Power supply terminal (+3.3V) SPFG Spindle motor hall sensor input from the motor driver CD/DVD selection signal output terminal "L": CD, "H": DVD CKSW Chucking detection switch input terminal OCSW Disc table open/close detection switch input terminal EEWP...
  • Page 56: Http://Www.xiaoyu163.Com

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 Pin No. Pin Name Description DVDD3 Power supply terminal (+3.3V) DQM1 Data mask signal output to the SD-RAM Write enable signal output to the SD-RAM Column address strobe signal output to the SD-RAM Row address strobe signal output to the SD-RAM Chip select signal output to the SD-RAM 137, 138...
  • Page 57: Http://Www.xiaoyu163.Com

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 Pin No. Pin Name Description DACVSSC Ground terminal Not used Full scale adjustment terminal VREF For reference voltage terminal DACVDDC Power supply terminal (+3.3V) ASDATA0 Audio serial data output to the HDMI transmitter TRG_SW Trigger detection switch input terminal Not used SCORE...
  • Page 58: Http://Www.xiaoyu163.Com

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 Pin No. Pin Name Description LPFOP Data PLL loop filter output terminal ADCVDD3 Power supply terminal (+3.3V) ADCVSS Ground terminal RFVDD3 Power supply terminal (+3.3V) RFRPDC RF ripple detect output terminal RFRPAC RF ripple detect input terminal HRFZC High frequency RF ripple zero crossing terminal CRTPLP...
  • Page 59: Http://Www.xiaoyu163.Com

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 DMB-IVHD BOARD IC701 CXD9873Q (HDMI TRANSMITTER) Pin No. Pin Name Description DVSS Ground terminal (digital system) 2 to 9 C0 to C7 Digital chroma signal input terminal Not used DVDD33 Power supply terminal (+3.3V) (digital system) System clock (27 MHz) signal input from the servo DSP DVSS Ground terminal (digital system)
  • Page 60: Http://Www.xiaoyu163.Com

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 Pin No. Pin Name Description DAC_AVDD3 Power supply terminal (+3.3V) (analog system) (for D/A converter) AVSS Ground terminal (analog system) (for D/A converter) DAC_AVDD3 Power supply terminal (+3.3V) (analog system) (for D/A converter) Component analog video signal (Y or green) output terminal Not used AVSS Ground terminal (analog system) (for D/A converter)
  • Page 61: Http://Www.xiaoyu163.Com

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 MAIN BOARD IC101 M30620MCP-A18FPU0 (SYSTEM CONTROLLER) Pin No. Pin Name Description SYS_RXD Serial data output to the SYSTEM CONTROL connector (SA-WSIS10) SYS_CLK Serial data transfer clock signal output to the SYSTEM CONTROL connector (SA-WSIS10) CEC_RX_IN CEC serial data input from the HDMI OUT connector SIRCS_IN...
  • Page 62: Http://Www.xiaoyu163.Com

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 Pin No. Pin Name Description KEY IN 0 Touch sensor data input terminal Serial data transfer clock signal output to the touch sensor KEY_CLOCK KEY_CS Chip select signal output to the touch sensor KEY_MODE Mode signal output to the touch sensor 53 to 58...
  • Page 63: Exploded Views

    http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 SECTION 7 EXPLODED VIEWS 3 7 63 1515 0 NOTE: • -XX and -X mean standardized parts, so they : Latin America models except The components identified by mark 9 contain may have some difference from the original Argentina confidential information.
  • Page 64: Panel (Top) Section

    http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 3 7 63 1515 0 7-2. PANEL (TOP) SECTION not supplied L 13942296513 MAIN board section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-2177-611-1 PANEL (SIDE-L) ASSY A-1249-887-A TOUCH BOARD, COMPLETE 4-933-134-01 SCREW (M2.6), +PTPWH X-2177-613-1 COVER (REAR) ASSY 3-100-544-01 CUSHION (TOUCH)
  • Page 65: Main Board Section

    http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 3 7 63 1515 0 7-3. MAIN BOARD SECTION not supplied not supplied not supplied not supplied not supplied supplied supplied (US, L 13942296513 CND) not supplied not supplied chassis section Note: If wire (flat type) is replaced, install it after bending it in the same form as that before replacement.
  • Page 66: Chassis Section

    http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 3 7 63 1515 0 7-4. CHASSIS SECTION not supplied not supplied not supplied not supplied not supplied not supplied mechanism deck section-1 not supplied not supplied not supplied not supplied not supplied not supplied L 13942296513 not supplied supplied not supplied...
  • Page 67: Mechanism Deck Section-1 (Cdm86A-Dvbu101)

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 7-5. MECHANISM DECK SECTION-1 (CDM86A-DVBU101) mechanism deck section-2 not supplied not supplied L 13942296513 (including sled motor, spindle motor) not supplied not supplied (sled motor) (spindle motor) Ref. No. Part No. Description Remark Ref.
  • Page 68: Mechanism Deck Section-2 (Cdm86A-Dvbu101)

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 7-6. MECHANISM DECK SECTION-2 (CDM86A-DVBU101) not supplied (MS-214 board) mechanism deck section-3 M001 L 13942296513 mechanism deck section-4 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-088-752-01 FLOATING SCREW (+PTPWH M2.6) 4-245-645-01 GEAR (IDL-E) 2-023-648-01 TAPPING +B 2X10 4-246-203-01 LEVER (RELEASE)
  • Page 69: Mechanism Deck Section-3 (Cdm86A-Dvbu101)

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 7-7. MECHANISM DECK SECTION-3 (CDM86A-DVBU101) not supplied not supplied L 13942296513 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-245-627-01 WASHER (6-2.7-0.4) 4-245-640-01 GEAR (CAP) 4-245-637-11 ROLLER, RUBBER 4-245-632-11 SPR-T (LOADING-L) 4-245-649-01 GEAR (IDL-I) 4-245-656-11 LEVER (LOADING-L) 4-245-657-11 LEVER (LOADING-R)
  • Page 70: Mechanism Deck Section-4 (Cdm86A-Dvbu101)

    http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 7-8. MECHANISM DECK SECTION-4 (CDM86A-DVBU101) not supplied L 13942296513 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-245-643-01 GEAR (IDL-C) 4-245-640-01 GEAR (CAP) X-4955-483-1 LEVER (GEAR LOADING) ASSY 4-245-628-01 LEVER (BU LOCK) 2-515-536-01 SPRING (DIR), TENSION COIL 4-245-642-01 GEAR (IDL-B)
  • Page 71: Electrical Parts List

    http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 SECTION 8 DMB-IVHD 3 7 63 1515 0 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the uA... : µA... uPA... : µPA... uPB... : µPB... uPC... : µPC... parts list may be different from the parts uPD...
  • Page 72 http://www.xiaoyu163.com HCD-IS10 DMB-IVHD 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C174 1-162-970-11 CERAMIC CHIP 0.01uF C717 1-162-970-11 CERAMIC CHIP 0.01uF C175 1-162-970-11 CERAMIC CHIP 0.01uF C176 1-162-970-11 CERAMIC CHIP 0.01uF C718 1-162-970-11 CERAMIC CHIP 0.01uF...
  • Page 73 http://www.xiaoyu163.com HCD-IS10 DMB-IVHD 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < DIODE > IC707 6-705-337-01 IC TK11150CSCL-G D3700 8-719-060-48 DIODE RB751V-40TE-17 IC3801 8-759-357-68 IC NJM2115M-TE2 (EXCEPT E32, AR) < FERRITE BEAD > <...
  • Page 74 http://www.xiaoyu163.com HCD-IS10 DMB-IVHD 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R151 1-216-833-11 METAL CHIP 1/10W R704 1-216-864-11 SHORT CHIP R152 1-216-864-11 SHORT CHIP R705 1-216-833-11 METAL CHIP 1/10W R153 1-216-864-11 SHORT CHIP R154 1-216-864-11 SHORT CHIP R706...
  • Page 75 http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 DMB-IVHD 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1140 1-216-864-11 SHORT CHIP R3813 1-218-879-11 METAL CHIP 0.5% 1/10W R1141 1-216-864-11 SHORT CHIP (EXCEPT E32, AR) R1142 1-216-864-11 SHORT CHIP R3814 1-218-879-11 METAL CHIP...
  • Page 76 1-784-833-51 CONNECTOR, FFC (LIF (NON-ZIF)) 21P < COIL > < IC > L 13942296513 L801 1-410-671-31 INDUCTOR 47uH IC901 6-600-466-01 IC TORX147L (SONY) L802 1-414-754-11 INDUCTOR 10uH (TV DIGITAL IN OPTICAL) IC902 8-759-278-58 IC NJM4558V-TE2 < FLUORESCENT INDICATOR TUBE >...
  • Page 77 http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C261 1-124-779-00 ELECT CHIP 10uF R917 1-216-809-11 METAL CHIP 1/10W C262 1-126-193-11 ELECT CHIP R918 1-216-829-11 METAL CHIP 4.7K 1/10W (EXCEPT E32, AR)
  • Page 78 http://www.xiaoyu163.com HCD-IS10 MAIN 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC281 6-709-213-01 IC NJM2387ADL3 (TE2) R146 1-216-809-11 METAL CHIP 1/10W R147 1-216-809-11 METAL CHIP 1/10W < COIL > R148 1-216-809-11 METAL CHIP 1/10W R149 1-216-833-11 METAL CHIP...
  • Page 79 http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 MAIN MS-214 TOUCH 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R305 1-216-864-11 SHORT CHIP C715 1-107-826-11 CERAMIC CHIP 0.1uF R306 1-216-864-11 SHORT CHIP C718 1-117-681-11 ELECT CHIP 100uF R307 1-216-864-11 SHORT CHIP...
  • Page 80 http://www.xiaoyu163.com HCD-IS10 Ver. 1.1 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark MISCELLANEOUS ************** 1-828-317-11 WIRE (FLAT TYPE) (11 CORE) 1-833-994-11 CABLE, SYSTEM 1-828-317-11 WIRE (FLAT TYPE) (11 CORE) 1-828-356-11 WIRE (FLAT TYPE) (19 CORE) 1-828-365-11 WIRE (FLAT TYPE) (21 CORE) 1-693-724-11 TUNER (FM/AM) (AEP, RU, UK) 1-693-725-11 TUNER (FM/AM) (CH)
  • Page 81 http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 MEMO L 13942296513 u163 http://www.xiaoyu163.com...
  • Page 82 http://www.xiaoyu163.com HCD-IS10 3 7 63 1515 0 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page. Ver.

Table of Contents