Page 2
THE FSM 10 Introduction The FSM10 is a 10 channel mono mixer in a 1RU package, designed to accept 9 inputs on XLR’s at Mic or Line level and the 10th on phono sockets at line level. Phantom power is selectable for each of the 9 XLR inputs and there are gain trims and internal jumpers to set input gain for Mic or Line level.
Page 3
INSTALLATION This unit must be earthed. Decide what configuration you require for the FSM 10, if it is different to the factory setting follow the instructions below, otherwise go to the set up section. To change the internal settings first ensure mains power is disconnected, then remove 3 screws from each side of the top cover and 2 screws from the top of the top cover (8 screws total, retain for refitting).
Front and Rear panel Black anodised aluminium with silver notation Case black plastic coated steel Dimensions 19" rack mounting. 1RU Width 482mm (19") Depth 200mm (7.9") Height 44mm (1.75") Formula Sound reserve the right to alter the specification without notice.
FORMULA SOUND LIMITED UNIT 23; STADIUM BUSINESS CENTRE; NORTH END ROAD; WEMBLEY; MIDDLESEX; HA9 0AT TELEPHONE +44 (0)208-900-0947 FAX +44 (0)208-903-8657 www.formula-sound.co.uk email info@formula-sound.co.uk E.U. CERTIFICATE OF CONFORMITY We declare that the products listed conform to the following directives and standards...
Need help?
Do you have a question about the FSM 10 and is the answer not in the manual?
Questions and answers