Remote Control Range; Loading Batteries - Marantz SR7300 User Manual

LCD (Liquid Crystal Display)
Information about currently selected functions and modes is displayed
on the LCD.
a
b
a Function Name indicator
Displays the name of the currently selected function (DVD, TV, etc.)
using up to 5 characters.
b LEARN indicator
Indicates when the remote controller is in the LEARN mode.
c USE indicator
For normal operation the USE indicator is displayed.
d MACRO indicator
Indicates when the remote controller is in the MACRO mode.
e Transmission indicator
Indicates when the remote controller is transmitting a signal.
f Low battery indicator
When this indicator appears, the batteries should be replace.
c e
d f

REMOTE CONTROL RANGE

The distance between the transmitter of the remote control unit and
the IR SENSOR of the SR7300 should be less than about 5 meters. If
the transmitter is pointed to a direction other than the IR SENSOR or if
there is an obstacle between them, remote control may not be
possible.
Remote-controllable range
60°
Remote control unit (RC7300SR)

LOADING BATTERIES

The life of the batteries used with the remote control unit is about 4
months with normal use. Also be sure to replace batteries earlier when
you notice that they are getting weak.
1.
Remove the back cover.
2.
Insert the new batteries (AA type) with correct (+) and (–) polarity.
3.
Close until it clicks.
Note:
• The supplied batteries are shipped to confirm the initial
operation. Therefore, the supplied batteries will be consumed
quickly.
SR7300
13