Sandstrom S32LDIB10 Instruction Manual page 26

3.
Press the buttons to select the following options and then press the
buttons to adjust the setting.
Sleep Timer
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
Time must be set before using Sleep Timer function.
Press the
standby mode: Off / 10 / 20 / 30 / ... / 60 / 90 / 120 min. The timer begins to count down from
the number of minutes selected.
Time Zone When you select a Time Zone city, the TV time is set by the time offset information based on
Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and
the time is set automatically by a digital signal.
Auto Sync
Select "On" to output the time information from digital signal (in DTV mode); select "Off" to
adjust the time manually.
Date/Time
The clock time will be set automatically when receiving a digital signal (Auto Sync set to Auto).
If a digital signal is not received then you may manually set the clock time (Auto Sync set to
Manual). You must set the time correctly before using Sleep Timer function.
Auto Turn On/Off Select "Enable" and then press the
and 0-9 buttons to set the Auto Turn On/Off time.
Auto Turn-On
and Prog
Auto Turn-Off Allows you to set the Off time that the TV will switch off automatically at the
4. Press the Menu button to return to the previous menu.
5. Exit button to exit the menu.
Press the
GB-24
buttons to select a period of time after which the TV automatically switches to
\
If you turn the TV off after setting the sleep timer, the sleep timer setting will
be erased.
Alternative
1. You may press the Sleep button repeatedly to select the number of minutes:
Off / 10 / ... / 110 / 120 minutes directly.
2. To cancel the sleep time, press the
appears.
Allows you to set the On time that the TV will switch on automatically and tune
to the channel you select.
time you select.
Sleep button repeatedly until Off
buttons
Auto Turn-On 00
Auto Turn-Off 00
Enable
: 00 Prog : 05
: 00