Sony RDR-VXD655 Service Manual page 34

QQ
3 7 63 1515 0
Audio Settings (Audio)
The "Audio" setup allows you to adjust the sound
according to the playback and connection
conditions.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "Setup," and press ENTER.
3
Select "Audio," and press ENTER.
The "Audio" setup appears with the following
options. The default settings are underlined.
Audio 10:10 AM
Title List
Tuner Audio : Main
Digital Out
Timer
Downmix : Dolby Surround
Edit
Audio DRC : Standard
Audio (HDMI) : Auto
Dubbing
Scan Audio : On
Disc Setting
Surround : Off
DV/D8 Audio Input : Stereo 1
Setup
Line Audio Input : Stereo
Tuner Audio
Selects the sound to be recorded.
Main Records only the main
sound.
SAP Records only the SAP
(Second Audio Program)
sound.
Note
If no SAP sound is received, the main sound is recorded
regardless of the setting.
Digital Out
The following setup items switch the method of
outputting audio signals when you connect a
component such as an amplifier (receiver) with a
digital input jack to the DIGITAL AUDIO OUT
(OPTICAL or COAXIAL)/HDMI OUT jack.
For connection details, see "Connecting to Your
AV Amplifier (Receiver)" on page 24.
Press ENTER, and select "Dolby Digital" or
"DTS."
TE
L 13942296513
DV/D8 Audio Input
Stereo 1 Records original sound only.
Normally select this when
dubbing a DV format tape.
Stereo 2 Records additional audio
only.
Mix Records both original and
additional sounds.
Note
Select "Stereo 2" or "Mix" if you have added a second
audio channel when recording with your digital video
camera.
Line Audio Input
When recording from equipment connected to the
LINE 1 IN or LINE 2 IN jacks to a DVD disc in
this recorder, select line input audio.
Stereo Records stereo sound only.
Main/Sub Records the two different
soundtracks on DVD-RWs
(VR mode)/DVD-Rs (VR
mode). You can select either
soundtrack when playing
back the disc.
z Hint
When recording on a disc other than DVD-RWs (VR
mode)/DVD-Rs (VR mode), select either sound track
with the connected equipment before recording.
www
.
http://www.xiaoyu163.com
Digital Out 10:10 AM
Title List
Dolby Digital : 4:3 Letter Box D-PCM
Dolby Digital
DTS On
Timer
Edit
Dubbing
Disc Setting
Setup
If you connect a component that does not accept
the selected audio signal, a loud noise (or no
sound) will come out from the speakers, and may
affect your ears or cause speaker damage.
◆ Dolby Digital
Selects the type of Dolby Digital signal.
D-PCM Select this when the recorder
is connected to an audio
component lacking a built-in
Dolby Digital decoder. You
can select whether the
signals conform to Dolby
Surround or not by making
adjustments to the
"Downmix" item in "Audio"
setup (page 100).
Dolby Select this when the recorder
Digital is connected to an audio
component with a built-in
Dolby Digital decoder.
Notes
• If the HDMI OUT jack is connected to equipment not
compatible with Dolby Digital signals, D-PCM signals
will be automatically output, even when "Dolby
Digital" is selected.
• The HDMI OUT jack cannot output Dolby Digital
signals for digital broadcasts. To hear Dolby Digital,
use the DIGITAL AUDIO OUT jacks.
◆ DTS (DVD VIDEOs only)
Selects whether or not to output DTS signals.
On Select this when the recorder
is connected to an audio
component with a built-in
DTS decoder.
Off Select this when the recorder
is connected to an audio
component without a built-in
DTS decoder.
,continued
99
Recording and VCR Settings
(Features)
The "Features" setup allows you to insert chapter
markings automatically, or select the recording
format for DVD-RW. You can also set functions
for VCR and Synchro Recording.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "Setup," and press ENTER.
3
Select "Features," and press ENTER.
The "Features" setup appears with the
following options. The default settings are
underlined.
Features 10:10 AM
Title List
DVD Auto Chapter : 5 Min
Format DVD-RW : VR
Timer
VCR Function
Edit
Synchro Recording : to DVD
Dubbing
Disc Setting
Setup
DVD Auto Chapter
Automatically divides a recording (a title) into
chapters by inserting chapter markings at
specified intervals. The markings are inserted
while the recording is being made.
Off No chapter mark is inserted.
5 Min Inserts chapter marks at
approximately 5 minute
intervals.
15 Min
Inserts chapter marks at
approximately 15 minute
intervals.
x ao u163
y
Note
Actual intervals may differ depending on the size of the
recording. The selected setting should be regarded as an
i
approximate chapter interval.
,continued
101
http://www.xiaoyu163.com
2 9
8
Note
If the HDMI OUT jack is connected to equipment not
compatible with DTS signals, no signal will be output,
regardless of the "DTS" setting.
Downmix (DVDs only)
Switches the method for mixing down to two
channels when you play a DVD which has rear
sound elements (channels) or is recorded in Dolby
Digital format. For details on the rear signal
components, see "A Connecting to audio L/R
jacks" on page 25. This function affects the output
of the following jacks:
– LINE OUT (AUDIO L/R) jacks
– AUDIO OUT L/R jacks
– DIGITAL AUDIO OUT (OPTICAL or
COAXIAL)/HDMI OUT jack when "Dolby
Digital" is set to "D-PCM" (page 99).
Dolby Normally select this
Surround position.
Multi-channel audio signals
are output to two channels
for enjoying surround
sounds.
Normal Multi-channel audio signals
are downmixed to two
channels for use with your
stereo.
To enjoy the surround effect of Dolby Digital, turn
off the surround settings of this recorder (page
102).
Audio DRC (Dynamic Range Control) (DVDs
only)
Makes the sound clear when the volume is turned
down when playing a DVD that conforms to
"Audio DRC." This affects the output from the
following jacks:
– LINE OUT (AUDIO L/R) jacks
– AUDIO OUT L/R jacks
– DIGITAL AUDIO OUT (OPTICAL or
COAXIAL)/HDMI OUT jack only when
"Dolby Digital" is set to "D-PCM" (page 99).
Standard Normally select this
position.
TV Mode Makes low sounds clear
even if you turn the volume
down.
Q Q
3 6 7 1 3
100
Format DVD-RW (DVD-RWs only)
Selects the recording format for an unused DVD-
RW, when first inserted.
VR
Automatically formats the disc in
VR mode.
Video Automatically formats the disc in
Video mode.
VCR Function
Press ENTER and select "Tape Length," "Auto
Play," or "Auto Repeat."
◆ Tape Length
T120 For T-120 or shorter length tapes.
T160 For T-160 length tapes.
T180 For T-180 or longer length tapes.
◆ Auto Play
On Starts playback automatically,
when you insert a tape with its
safety tab removed.
Off Turns off the function. You need
to press H PLAY to start
playback, even if you insert a tape
with its safety tab removed.
◆ Auto Repeat
On Plays back a tape repeatedly. The
VCR rewinds the tape to the
beginning and restarts playback
automatically.
Off Turns off the function.
Synchro Recording
to DVD
Sets the recorder to record
programs from connected
equipment that has a timer
function (such as a satellite tuner)
to a DVD disc.
to VIDEO Sets the recorder to record
programs from connected
equipment that has a timer
function (such as a satellite tuner)
.
to a VHS tape.
102
1-24
9 4 2 8
Wide Gives you the feeling of
Range being at a live performance.
Audio (HDMI) (DVD VIDEOs only)
Select the output method from the HDMI OUT
jack.
Auto Normally, select this.
Outputs audio signals
according to the "Dolby
Digital" setting.
PCM Converts Dolby Digital to
PCM.
Note
Dolby Digital signals on digital broadcasts will be
converted to PCM signals.
Scan Audio (DVDs only)
On Outputs audio signals during
FF1 fast-forward of a DVD
disc with Dolby Digital
soundtracks.
Off No sound is output during
FF1 fast-forward.
Note
Sound will be interrupted during Scan Audio.
Surround
Turns on the surround function to create virtual
rear speakers from a stereo TV or two front
speakers (page 25).
Off No surround effect.
Surround1 Creates one set of virtual
surround speakers.
Surround2 Creates two sets of virtual
surround speakers.
Surround3 Creates three sets of virtual
surround speakers.
Notes
• When the playback signal does not contain a signal for
the surround speakers, the surround effects will be
difficult to hear.
• When you select one of the surround modes, turn off
the surround settings of the connected TV or amplifier
1 5 0 5 8 2 9 9 4
(receiver).
Language, Parental, Digital
broadcast settings/Factory
Settings (Options)
The "Options" setup allows you to set up other
operational settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "Setup," and press ENTER.
3
Select "Options," and press ENTER.
The "Options" setup appears with the
following options. The default settings are
underlined.
Options 10:10 AM
Title List
Language
Parental
Timer
Digital Wide Control : 16:9
Edit
Caption Service : Off
Dubbing
Caption Setting
Disc Setting Front Display : Auto
: DVD 3
Command Mode
Setup
Factory Setting
Language
◆ OSD (On-Screen Display)
Switches the display language on the screen.
◆ Disc Menu (DVD VIDEOs only)
Switches the language for the DVD menu.
◆ Audio (DVD VIDEOs only)
Switches the language of the soundtrack.
When you select "Original," the language given
priority in the disc is selected.
◆ Subtitle (DVD VIDEOs only)
m
Switches the language of the subtitles recorded on
the disc.
When you select "Auto," the subtitle language
changes according to the language you selected
co
for the soundtrack. See page 122 for an
explanation of the language abbreviations.
Note
If you select a language in "Disc Menu," "Subtitle," or
"Audio" that is not recorded on the DVD VIDEO, one of
the recorded languages will be automatically selected.
9 9
2 8 9 9