Sony RDR-VXD655 Service Manual page 33

QQ
3 7 63 1515 0
3
Select "Auto Preset," and press ENTER.
All receivable channels are preset in
numerical sequence.
Auto Preset
Title List
Searching for receivable Analog channels.
Please wait.
Timer
Edit
Dubbing
Disc Setting
Stop
Setup
After searching for analog channels is
complete, receivable digital channels are then
searched for automatically.
Auto Preset
Title List
Searching for receivable Digital channels.
Please wait.
Timer
Allow 40+ minutes for completion.
To stop searching, press [Enter].
Edit
Dubbing
Disc Setting
Stop
Setup
Searching for channels may take 40 minutes
or more to complete.
If you press ENTER while searching for
channels, searching will stop.
Manual Set
Presets analog channels manually.
If some channels cannot be set using the "Auto
Preset" or "Easy Setup" function, you can set them
manually. Digital channels are only scanned when
"Auto Preset" is set (page 94).
Erases any unnecessary digital or analog channels
manually.
1
Select "Antenna/Cable," and press ENTER.
Tuner Preset
Title List
Antenna/Cable : Antenna
Auto Preset
Timer
Manual Set
Edit
Dubbing
Disc Setting
Setup
"Antenna": Presets VHF and UHF channels.
"Cable": Presets cable TV channels.
2
Select an option, and press ENTER.
TE 3
Select "Manual Set," and press ENTER.
L 13942296513
Video Settings (Video)
The "Video" setup allows you to adjust items
related to the image, such as size and color.
Choose the settings according to the type of TV,
tuner, or decoder connected to the recorder.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "Setup," and press ENTER.
3
Select "Video," and press ENTER.
The "Video" setup appears with the following
options. The default settings are underlined.
Video
Title List
TV Type : 16:9
HDMI Resolution : Auto
Timer
Video (HDMI) : Y Cb Cr
Edit
Black Level : On
Dubbing
Picture Control : Standard
Disc Setting Progressive : Off
Setup
TV Type
Selects the aspect ratio of the connected TV (4:3
standard or wide).
16:9 Select this when connecting to a
wide-screen TV or TV with a
wide mode function.
4:3 Letter Select this when connecting to a
Box 4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the screen.
4:3 Pan
Select this when connecting to a
Scan 4:3 screen TV. Automatically
displays a wide picture on the
www
entire screen and cuts off the
portions that do not fit.
.
http://www.xiaoyu163.com
4
Select the broadcast you want using M/m.
Manual Set
Select a broadcast and channel.
10:10 AM Broadcast Channel
Analog 69
Add Erase
Press , to select a channel.
5
Select the channel you want preset using CH
+/–, or disable using M/m, and press ENTER.
6 Select "Add" or "Erase" using </,, and
press ENTER.
To cancel the setting, select "Exit" and press
10:10 AM
ENTER.
7
To preset or disable another channel, repeat
steps 4 and 5.
Note
The recorder does not allow you to add digital channels
manually.
If some digital channels could not be set, set "Auto
Preset" again.
10:10 AM
Antenna
Cable
16:9
4:3 Letter Box
4:3 Pan Scan
Note
Depending on the disc, "4:3 Letter Box" may be selected
10:10 AM
automatically instead of "4:3 Pan Scan" or vice versa.
HDMI Resolution
Selects the type of video signals output from the
HDMI OUT jack. When you select
"Auto"(default), the recorder outputs video
signals of the highest resolution acceptable for
your TV. If the picture is not clear, unnatural or
not to your satisfaction, try another option that
suits the disc and your TV/projector, etc. For
details, refer also to the instruction manual
supplied with the TV/projector, etc.
The setting is effective only when you connect an
HDMI equipped TV to the HDMI OUT jack.
Auto Normally, select this.
1920×1080i Sends 1920×1080i video signals.
1280×720P Sends 1280×720p video signals.
720×480P Sends 720×480p video signals.
Video (HDMI)
Selects the type of output from the HDMI OUT
jack.
The setting is effective only when you connect an
HDMI equipped TV to the HDMI OUT jack.
x ao
Y Cb Cr Selects this when connecting to
y
an HDMI device.
RGB Gives brighter colors and deeper
i
black. Select this if colors are
weak.
http://www.xiaoyu163.com
8
Clock Setting (Clock Set)
The "Clock Set" setup allows you to make clock
settings for the recorder.
1
Press SYSTEM MENU while the recorder is
Exit
in stop mode.
2
Select "Setup," and press ENTER.
3
Select "Clock Set," and press ENTER.
The "Clock Set" setup appears with the
following options.
Clock Set
Title List
Auto
Timer Manual
Edit
Dubbing
Disc Setting
Setup
Auto (Auto Clock Set)
Turns on the Auto Clock Set function when a digital
channel or an analog channel in your local area
broadcasts a time signal.
1
Select "Auto," and press ENTER.
Auto Clock Set
Title List
Clock Set CH
Time Zone
Timer
Daylight Saving
Edit
Dubbing
Disc Setting
Setup
2
Select "Clock Set CH," "Time Zone," or
"Daylight Saving" and press ENTER.
3 Adjust these settings by pressing M/m and
ENTER.
◆ Clock Set CH
This setting is effective when the recorder
works using a time signal carried on an analog
channel.
Select an analog channel that carries a time
signal using M/m.
Use this option if you know of a channel that
Q Q
carries a time signal. Most PBS member
3 6 7 1 3
stations broadcast a time signal. For the fastest
95 96
Black Level
Selects the black level (setup level) for the video
signals output from the LINE OUT jacks
(page 21).
This setting is not effective when the recorder
outputs progressive signals.
On Raises the standard black level.
Select this when the picture
appears too dark.
Off Sets the black level of the output
signal to the standard level.
Picture Control
Selects the picture control for the video signals
output from the LINE OUT jacks (page 21).
You can adjust the video signal of DVD or
VIDEO CD (with PBC function off) from the
recorder to obtain the picture quality you want.
Select the setting that best suits the program you
are watching.
Dynamic 1 Produces a bold dynamic picture
by increasing the picture contrast
and the color.
Dynamic 2 Produces a more dynamic picture
than "Dynamic 1" by further
increasing the picture contrast
and the color.
Standard Displays a standard picture
(function turned off).
Cinema 1 White colors become brighter
and black colors become richer,
and the color contrast is
increased.
Cinema 2 Enhances details in dark areas by
increasing the black level.
Personal Adjusts "Contrast," "Brightness,"
"Color," and "Hue" using M/m/
</,.
z Hint
u163 When you watch a movie, "Cinema 1" or "Cinema 2" is
recommended.
.
,continued
97 98
1-23
2 9 9 4 2 8
response, select your local PBS station. Leave
the setting at "Auto" to have the recorder
automatically search for a digital or analog
channel that carries a time signal.
Clock Set CH
Title List
Timer
Edit
Select a Channel:
Dubbing
Disc Setting
Setup
◆ Time Zone
10:10 AM Select the time zone for your area.
The options are:
Atlantic y Eastern y Central y
Mountain y Pacific y Alaska y Hawaii
y Atlantic
◆ Daylight Saving
Select "On" or "Off" (standard time), or select
"Auto" to have the recorder automatically set
the daylight saving time.
zHint
When "Auto" is selected, this setting may not be set
correctly depending on the signal. In this case, select
"On" or "Off."
Manual
If the Auto Clock Set function did not set the clock
correctly for your local area, set the clock
10:10 AM
manually.
: Auto
: Atlantic 1
Select "Manual," and press ENTER.
: Auto
Clock Set
Title List
Set the time and date manually.
Timer
Edit
Dubbing
Disc Setting
Setup
2
Press M/m to set the month, and press ,.
Set the day, year, hour, minutes, and AM/PM
in sequence. Press </, to select the item to
be set, then press M/m to set the item. The day
of the week is set automatically.
3
Press ENTER to start the clock.
1 5 0 5 8 2 9 9 4
Progressive
If your TV accepts progressive (480p) format
signals, you will enjoy accurate color reproduction
and high quality image.
Connect your TV to the COMPONENT VIDEO
OUT jacks (page 23).
On Set the recorder to output
progressive signals.
Off Outputs video signals in interlace
format.
Notes
• If you select progressive signals when you connect the
recorder to a TV that cannot accept the signal in
progressive format, the image quality will deteriorate.
In this case, set "Progressive" to "Off." Or, press DVD
to operate the DVD recorder in stop mode, and then
hold down X PAUSE on the recorder for five seconds
or more.
• When you connect your TV using an HDMI cable, the
"Progressive" setting is set to "On."
m
co
9 9
10:10 AM
Auto
10:10 AM
Month Day Year
Mon
01 01 2007
Hour Min AM/PM
10 : 10 AM
2 8 9 9