Sony RDR-VXD655 Service Manual page 29

QQ
3 7 63 1515 0
z Hints
• When the start time and the channel or input source to
be recorded are the same but the "Media" setting
differs, the program is recorded to both the DVD disc
and the VHS tape.
• You can also turn on the timer programming menu
from the System Menu. Press SYSTEM MENU to
select "Timer," and select "Timer-Standard."
• You can use the number buttons and the dot (·) button
to select a channel.
• You can select a video source from the LINE 1 IN or
LINE 2 IN jacks, using the INPUT button.
Notes
• To record a cable or satellite program, turn on the cable
box or satellite receiver and select the program you
want to record. Leave the cable box or satellite receiver
turned on until the recorder finishes recording.
• Even when correctly set, the program may not be
recorded if another recording is underway, or other
prioritized timer setting overlaps.
• You cannot record on a tape with its safety tab
removed.
• Before the timer recording starts, "TIMER REC"
flashes in the front panel display.
• The recorder automatically turns off when a timer
recording finishes, even if the recording started with
the recorder turned on.
• Digital closed captions cannot be recorded (page 35).
• For audio settings, "Stream 1" is usually recorded
(page 35).
• When you set the Digital Rating, a program with a
digital rating beyond your limit setting cannot be
recorded correctly (page 103).
TE
L 13942296513
Changing or Canceling VCR
Timer Settings (Timer List)
You can change or cancel timer settings using the
Timer List menu.
1 1 2 2 3 3
4 4 5 5 6 6
7 7 8 8 9 9
0 0
SYSTEM
MENU
O RETURN
1
Press SYSTEM MENU.
The System Menu appears.
2
Select "Timer," and press ENTER.
3
Select "Timer List," and press ENTER.
Timer List
No. Media Date Start End
01 VCR 04/15 09:00PM 10:00PM
02 VCR 04/30 09:15PM 09:45PM
03 --- --/-- --:-- --:--
04 --- --/-- --:-- --:--
05 --- --/-- --:-- --:--
06 --- --/-- --:-- --:--
Timer information displays the recording
date, time, recording mode, etc.
www
If there are more than six timer settings, press
m to display the next page.
4
Select the timer setting you want to change
or cancel, and press ENTER.
The sub-menu appears.
.
http://www.xiaoyu163.com
Recording From Connected
Equipment With a Timer
(Synchro Rec)
You can set the recorder to automatically record
programs from connected equipment that has a
timer function (such as a satellite tuner). Connect
the equipment to the LINE 1 IN jacks on the rear
of the recorder (page 18).
When the connected equipment turns on, the
recorder starts recording a program from the LINE
1 IN jacks.
1 1 2 2 3 3
4 4 5 5 6 6
7 7 8 8 9 9
0 0
SYSTEM
MENU
1
Press VIDEO to operate the VCR.
2
Insert a tape with its safety tab in place.
3
Press REC MODE repeatedly to select the
recording mode, "SP" or "EP."
4
Press SYSTEM MENU while the recorder is
in stop mode.
5
Select "Setup," and press ENTER.
6
Select "Features," and press ENTER.
The "Features" setup appears.
7
Select "Synchro Recording," and press
ENTER.
Timer List
No. Media Date Start End Ch
01 VCR 04/15 09:00PM 10:00PM Ch8
02 VCR 04/30 09:15PM 09:45PM D11.1
03 --- --/-- --:-- --:-- ----
04 --- --/-- --:-- --:-- ----
05 --- --/-- --:-- --:-- ----
06 --- --/-- --:-- --:-- ----
5
Select one of the options, and press
ENTER.
"Edit": Changes the timer setting.
Select an item using </, and adjust using
M/m. Press ENTER.
Timer – Standard
M/m/</,,
No Rec To Date Start End Source Mode Edit
ENTER
No.01
01 DVD 04/15 09:00PM 10:00PM CH8
02 DVD 04/30 09:15PM 09:45PM CH11
Media Date Start End Ch
03 --- --/-- --:-- --:-- ----
: :
VCR 04/15 09 00 PM 10 00 PM Ch 8
04 --- --/-- --:-- --:-- ----
05 --- --/-- --:-- --:-- ----
06 --- --/-- --:-- --:-- ----
"Erase": Erases the timer setting.
Select "OK" and press ENTER when asked
for confirmation.
Timer List
No Rec To Date Start End Source Mode Edit
01 VHS 4/15 09:00PM 10:00PM CH8
10:10 AM
02 VHS 4/30 09:15PM 09:45PM CH11
Do you want to erase "No.01"?
Ch Mode Edit
03 --- --/-- --:-- --:-- ----
Ch8 SP
04 --- --/-- --:-- --:-- ----
OK Cancel
D11.1 SP
05 --- --/-- --:-- --:-- ----
---- ---
06 --- --/-- --:-- --:-- ----
---- ---
---- ---
6
---- --- Press SYSTEM MENU to turn off the Timer
List.
To return to the previous display
Press O RETURN.
x ao
Notes
y
• Even when correctly set, the program may not be
recorded if another recording is underway, or other
prioritized timer setting overlaps. For priority, see
i
page 78.
• You cannot change the timer settings for a recording
currently underway.
• The Timer List displays both the DVD recorder and
VCR timer settings.
http://www.xiaoyu163.com
8
8
Select "to VIDEO," and press ENTER.
9
Press SYSTEM MENU to turn off the menu.
10
Set the timer on the connected equipment
to the time of the program you want to
record, and turn it off.
11
Press SYNCHRO REC.
The SYNCHRO REC indicator lights up on
the front panel and the recorder stands by for
Synchro-Rec.
The recorder starts recording when a signal is
received from the connected equipment.
When the connected equipment turns off, the
recording stops and the recorder turns off.
To stop recording
Press x STOP twice.
VIDEO
To cancel Synchro-Rec function
Press SYNCHRO REC before recording starts.
The SYNCHRO REC indicator on the recorder
turns off.
If you press SYNCHRO REC during Synchro-
M/m/</,,
Rec, the recording stops, the SYNCHRO REC
ENTER
indicator turns off, and the recorder turns off.
If the timer settings of a Synchro-Recording
x STOP and another timer recording overlap
Regardless of whether or not the program is a
REC MODE
Synchro-Rec program, the program that starts first
SYNCHRO
REC has priority and the second program starts
recording only after the first program has finished.
If the end time of one setting and the start time of
another timer setting is the same, the beginning of
the program that starts later will be cut.
7:00
Program 1
Program 2
Q Q
3 6 7 1 3
,continued
79 80
Recording From Connected
10:10 AM
Equipment Without a Timer
Mode Edit
Edit
Erase
---
---
---
You can record from a connected VCR or similar
---
device. For connection details, see "Connecting
Another VCR or Similar Device" on page 32.
10:10 AM
Mode
---
SP
---
---
---
z REC
10:10 AM
1
Press VIDEO to operate the VCR.
---
2
Insert a tape with its safety tab in place.
---
---
3
Press INPUT repeatedly to select an input
---
source according to the connection you
made.
The front panel display changes as follows:
When selecting a digital channel
LINE1 LINE2
When selecting an analog channel
u163
LINE1 LINE2
4
Press REC MODE repeatedly to select the
.
recording mode, "SP" or "EP."
5
Insert the source tape into the connected
equipment and set to playback pause.
81 82
1-19
2 9 9 4 2 8
Notes
• The recorder starts recording only after detecting the
video signal from the connected equipment. The
beginning of the program may not be recorded
regardless of whether or not the recorder's power is on
or off.
• To use the connected equipment during Synchro-Rec
standby, cancel the standby mode by pressing
SYNCHRO REC. To return to standby mode again, be
sure to turn off the equipment and press SYNCHRO
REC, before Synchro-Rec starts.
• The Synchro-Rec function does not work with some
tuners. For details, see the tuner's operating
instructions.
• During Synchro-Rec standby, the Auto Clock Set
function does not work (page 96).
• After a recording has finished, the recorder enters the
Synchro-Rec standby mode until the SYNCHRO REC
indicator turns off.
• You cannot record on a tape with its safety tab
removed.
• If Synchro-Rec starts with the recorder turned on, the
recorder will turn off when the recording ends.
8:00 9:00 10:00
will be cut off
1 5 0 5 8 2 9 9 4
6
Press z REC on this recorder and the
pause or play button on the connected
equipment at the same time.
Recording starts.
To stop recording, press x STOP on this
recorder.
Notes
• A video game image may not be recorded clearly.
• You cannot record on a tape with its safety tab
removed.
VIDEO
• During recording or recording pause, you cannot
1 1 2 2 3 3
change the recording mode.
4 4 5 5 6 6
• You cannot change the channel or input source during
INPUT
7 7 8 8 9 9
recording.
0 0
x STOP
REC MODE
DV Digital Channel
m
co
DV Analog Channel
9 9
2 8 9 9