System Setup - Onn ONA16AV009 Product Manual

SYSTEM SETUP

Setting Menus:
In stop playback mode, press the SETUP Button the setting menu will appear on the screen as below. Using the
◄, ►, ▲, ▼
Direction
Button to enter or confirmed the selection. After setting, press the SET UP Button to save the settings and exit.
In General Setup Page:
1. If TV Shape is selected, using the Direction and OK Button to set the aspect ratio to match the
connected TV.
2. If Angle Mark is selected, using the Direction and OK buttons to set it
multi-angles are available in the playing DVD,
3. If OSD Lang (On Screen Display Language) is selected, using the
OSD language as desired.
4. If Screen Saver is selected, using the Direction and
screen saver will come on when the unit stops
5. If Last Memory is selected, using the Direction and OK Buttons to set it On or Off. If set to On, the unit
will start playback from the position where the disc was stopped last time.
In Audio Setup Page:
If Speaker Setup is selected, press the
If Downmix is selected, using the Direction and OK Buttons set it
1.
~ If set to Lt/Rt, the rear left or rear right channels will plays on both Left and Right Speakers.
~ If set to Stereo, the rear left channel will plays on Left Speaker; the rear right channel will plays on Right
Speaker.
Buttons to select and highlight the function you
- - General Setup Page - -
TV Shape
Angle Mark
OSD Lang
Screen Saver
Last Memory
Go To General Setup Page
OK Button, the sub-setting
need to set or reset. Press the
Wide
On
Eng
On
Off
the multi-angle logo will appear on the screen.
Direction and
OK Buttons to set
or the image is paused for approximately five minutes.
menu will appear.
to Lt/Rt; Stereo.
17
On or Off. If set to On, when
OK Buttons to set the
it On or Off. If set to On, the
OK