Acura 2003 NSX Owner's Manual page 67

Table of Contents

Advertisement

Main Menu
Table of Contents
Keys and Locks
Immobilizer System
The Immobilizer System protects
your car from theft. A properly-
coded ignition key must be used in
the ignition switch for the engine to
start. If an improperly-coded key (or
other device) is used, the engine's
fuel system is disabled.
When you turn the ignition switch to
ON (II), the Immobilizer System
indicator should come on for a few
seconds, then go out. If the indicator
starts to blink, it means the system
does not recognize the coding of the
key. Turn the ignition switch to
LOCK (0), remove the key, reinsert
it, and turn the switch to ON (II)
again.
64
Instruments and Controls
The system may not recognize your
key's coding if another immobilizer
key or other metal object is near the
ignition switch when you insert the
key. To make sure the system
recognizes the key code:
Do not keep other immobilizer
keys on the same key ring.
Use a plastic or leather key fob,
not metal.
Keep other keys away from your
vehicle's key and the ignition
switch while trying to start the
engine.
If the system repeatedly does not
recognize the coding of your key,
contact your Acura dealer. Do not
attempt to alter this system or add
other devices to it. Electrical
problems could result that may make
your car undriveable.
If you have lost your key and you
cannot start the engine, contact your
Acura dealer.

Advertisement

Table of Contents
loading

Table of Contents