Rear Panel Facilities - Pioneer SX-3600 Operating Instructions Manual

I
I
REAR PANEL FACILITIES
O AM STEREO OUTPUT JACK
This jack is for AM stereo broadcasts' When listening the
AM stereo broadcasts, connect the adaptor component
to this jack. For further details, refer to the operating
instructions of the AM stereo adaptor component'
@ SPE AK ERS T E RM INAL S A
Connect your first pair of speakers to these terminals'
@ SP EA KE RS TE RM IN ALS B
Connect your second pair of speakers to these terminals'
@ F M ANT ENNA INP UT TER MI NA LS FO R
3 OO- O HM TWIN - LEAD FEED ER
Connect a 300-ohm twin-lead feeder to these terminals
when using it as the feeder from the FM antenna' Use
these terminals when connecting the accessory T-type
FM antenna.
@ F M A NTE NNA INPU T TE RM INA LS FO R
75-OHM COAXIAL CABLE
Connect a 75-ohm coaxial cable to these terminals when
using it as the feeder from the FM antenna'
G) GN D T ER MINA L
This is the ground terminal. From aspects of both safety
and reduced noise. connect a ground lead to this terminal'
@ AM A NT ENNA IN PUT TER MI NAL
when using an external AM antenna, connect it to this
ter min al.
@ G ND TE RM IN A L
This is the ground terminal. Connect the ground wire of
the turntable, etc. to this terminal'
@ PHONO JACKS
Connect the turntable output cords to these jacks'
@ AUX JACKS
These are auxiliary input jacks. Connect a TV tuner or
cartridge taPe PlaYer to them'
C) rapr 1 JACKS
Connect the tape deck cords to these jacks.
Connect the REC (recording) jacks to the INPUT jacks on
the tape deck, and the PLAY (playback) jacks to the
OUTPUT jacks.
@ TAPE 2 JACKS
Connect your second tape deck cords to these jacks'
G) AC OUTLETS
These are spare power outlets' Insert the power plug on
the stereo components (turntable, tape deck, etc') into
these outlets.
SWITCHED:
The power supplied through this out-
let is coupled to the operation of the
receiver's power switch' The maximum
Power capacitY which maY be con-
nected to this outlet is 50W.
UNSWITCHED: The power is always supplied through
this outlet regardless of the position of
the Power switch. The maximum
Power capacitY which maY be con-
nected to this outlet is 100W'
@ POWER CORD
Plug this into an wall socket.