Select Dial Mode; Changing The Pin; Default Settings; Delete Hs - Motorola ME4050 Series User Manual

Select Dial Mode

1. Press the key repeatedly until BASE appears.
2. Press the
3. Press the or
4. Press the
5. Press the or
6. Press the

Changing the PIN

1. Press the key as often as necessary until the BASE menu appears.
2. Press the
3. Press the or
4. Press the
5. Enter the old PIN (0000).
6. Press the
7. Enter the new PIN (e.g. 1111).
8. Press the
9. Enter the new PIN again (e.g. 1111).
10. Press the

Default Settings

1. Press the key as often as necessary until the BASE menu appears.
2. Press the
3. Press the or
4. Enter the PIN.
5. Press the
6. Press the

Delete HS

If several handsets are registered on one base station, they can deregister each other
mutually. The last handset cannot be deregistered.
1. Press the key as often as necessary until the BASE menu appears.
2. Press the
3. Press the or
4. Press the
5. Enter the PIN. Note: (Factory setting is 0000).
6. Press the
7. If necessary, use the
8. Press the
9. Press the
34
key.
key to select DIAL MODE.
key.
key to select TONE or PULSE.
key to confirm the selection.
key.
as often as necessary to select the CHANGE PIN submenu.
key.
key.
key.
key.
key.
as often as necessary to select the required DEFAULT submenu.
key.
key to confirm.
key.
as often as necessary to select the DEREGISTER submenu.
key.
key.
or key to select the handset.
key.
key to confirm the selection.
33