REMOTE ACCESS COMMANDS
FUNCTION
Play messages in a mailbox
Repeat a message
Skip a message
Stop
Play menu options
Save messages
Delete message
Review announcement
Record announcement
Record memo
End remote access call
Turn system off
Turn system on
COMMAND
Press #, then the desired mailbox number (1, 2, 3). The system plays
new messages. If there are no new messages, the system plays old
messages.
Press #4 while message is playing; press #4 twice to replay previous
message.
Press #6 while message is playing; each press advances to next
message.
Press #5.
Hang up.
Press #9 while message is playing.
Press #7; system plays announcement, then beeps.
Press *7; after beep, record announcement, press #5 to stop. System
plays back announcement.
Press *8, then the mailbox number where you want memo recorded;
speak after the system announces "Now recording." Press #5 to stop.
Press *0
Press #0; the system announces, "Answering machine off." Press #0
again to turn the system back on.
When system is off, it answers after 10 rings and announces, "Please
enter your security code." Enter your remote access code.
47