Hardware Monitoring - Alcatel-Lucent OmniSwitch OS6450-10 Hardware User's Manual

OmniSwitch 6450 Feature Overview

Hardware Monitoring

Automatic Monitoring
Automatic monitoring refers to the switch's built-in sensors that automatically monitor operations. If an
error is detected (e.g., over-threshold temperature), the switch immediately sends a trap to the user. The
trap is displayed on the console in the form of a text error message.
LEDs
LEDs, which provide visual status information, are provided on the chassis front panel. LEDs are used to
indicate conditions such as hardware and software status, temperature errors, link integrity, data flow, etc.
For detailed LED descriptions, refer to
Components."
User-Driven Monitoring
User-driven hardware monitoring refers to CLI commands that are entered by the user in order to access
the current status of hardware components. The user enters "show" commands that output information to
the console. Monitoring information for chassis components, such as the optional back up power supply,
chassis temperature sensor, and chassis fans is provided in
Hardware Components."
OmniSwitch 6250/6450 CLI Reference Guide.
page 1-6
Chapter 3, "OmniSwitch 6450 Chassis and Hardware
The show commands for all the features are described in detail in the
OmniSwitch 6450 Hardware Users Guide
OmniSwitch 6450 Switches
Chapter 3, "OmniSwitch 6450 Chassis and
September 2015