Repair and replacement
■
It is recommended that genuine Toyota parts be used for repairs to ensure
performance of each system. If non-Toyota parts are used in replacement or if
a repair shop other than a Toyota dealer performs repairs, confirm the war-
ranty coverage.
Reset the maintenance data (U.S.A. only)
■
After the required maintenance is performed according to the maintenance
schedule, please reset the maintenance data.
To reset the data, follow the procedure described below:
Turn the engine switch off with the trip meter A reading shown.
1
( P. 77, 82)
Vehicles without a smart key system:
2
While pressing the "DISP" switch
( P. 82), turn the engine switch to the "ON" position (do not start the
engine because reset mode will be canceled).
Vehicles with a smart key system:
While pressing the "DISP" switch
( P. 82), turn the engine switch to the IGNITION ON mode (do not start the
engine because otherwise the reset mode will be canceled).
*
1
: Vehicles with a drive monitor display
*
2
: Vehicles with a multi-information display
Continue to press and hold the button until the trip meter displays "000000".
3
Allow inspection and repairs to be performed by a Toyota dealer
■
Toyota technicians are well-trained specialists and are kept up to date with
●
the latest service information. They are well informed about the operations
of all systems on your vehicle.
Keep a copy of the repair order. It proves that the maintenance that has
●
been performed is under warranty coverage. If any problem should arise
while your vehicle is under warranty, your Toyota dealer will promptly take
care of it.
COROLLA_TMMMS_TMMC_U (OM12F00U)
7-2. Maintenance
*
1
( P. 77) or display change button
*
1
( P. 77) or display change button
421
*
2
*
2
7