Data/Fax Calls; Data Transfer - Nokia 6255 User Manual

■ Data/fax calls

Data or fax calls is a network service.
See "Network Services" on page ix
for more information.
If your wireless service provider
supports this feature, you can set up
the phone to send or receive data or
fax calls when a terminal, such as a
PDA or PC, is connected.
Note: For more information
on connectivity, refer to the
PC/PDA Connectivity Guide.
The PC/PDA Connectivity
Guide can be downloaded
from the Nokia website at
http://www.nokia-asia.com.
1. At the standby mode screen,
select Menu >
settings > Data/fax calls
Incoming data/fax
2. Select one of the following
options:
Normal — The phone receives
incoming calls as usual.
Data calls only
receives only data calls.
Fax calls only — The phone
receives only fax calls.
3. When you are finished receiving
the fax or data call, repeat Steps
1 and 2 and select Normal.
Copyright © 2005 Nokia. All rights reserved.
Settings > Call
>
call.
— The phone
C o n n e c t i v i t y ( M e n u 1 0 )

Data transfer

You can view the transmission speed
when sending or receiving data or
fax calls.
At the standby mode screen, select
Menu > Settings >
Data/fax calls > Data rate display
Graphic or Off.
For better performance during data
calls, place the phone on a
stationary surface with the keypad
facing downward. Do not move the
phone by holding it in your hand
during a data call.
Call settings >
>
81