Table of Contents
Advertisement
5-5. Temperature Control and Other Capacity Explanation
1. Display design
2. Temperature control function
1) Temperature selection of freezer compartment
After the initial key selection, it displays the notch which is presently set up, then within 5
seconds re-memorize the key after 1-2) points mentioned below. If there is no input of the
key, it moves back to the previous temperature display.
1-1) From -14˚C ~ -25˚C, each one key is selected in 1˚C interval.
1-2) Selection key operation for Freezer is set up orderly.
1-3) Actual temperature is indicated during both Power-On and electrical failure.
1-4) Standard temperature of each stage is as follows.(standard for 1/3 height)
Stage
1
Temperature
-14˚C -15˚C -16˚C -17˚C -18˚C -19˚C -20˚C -21˚C -22˚C -23˚C -24˚C -25˚C
1-5) After key input, seven-segment indication changes immediately but actual function
operates after 10seconds.
2) Temperature selection of refrigerator compartment
2-1) From 7˚C ~ 1˚C, each one key is selected in 1˚C interval.
2-2) After the initial key selection, the former selected temperature is displayed, and within
5seconds temperature selection alters as in 2-3), and when final key input is done, the
final key input temperature converse into a set point after 10 seconds.
2-3) Set up is established orderly according to operation of selection button.
2-4) Actual temperature is indicated during both Power-On and electrical failure.
2-5) Standard temperature of each stage is as follows.(standard for 1/3 height)
Stage
Temperature
2-6) After key input seven-segment indication changes immediately but actual function
operates after 10seconds.
2
3
4
1
2
7˚C
6˚C
5
6
7
3
4
5˚C
4˚C
11
8
9
10
5
6
3˚C
2˚C
11
12
7
1˚C
Hide quick links:
Advertisement
Table of Contents
