Functions - Williams SYMPHONY GRAND Owner's Manual

FUNCTIONS

The Functions settings in the Symphony Grand
are in the Main System settings. Press the
Function button to enter this mode.
Main Settings page 1
Main Volume
Normally the Volume for the piano is controlled
by the Volume knob on the front panel. There
is also an overall main volume control in the
Function Mode.
Press the FUNCTION button. On Main Setting
Page 1 you can change the parameter for the
Main Volume by selecting it with the page
buttons to adjust and turning the Value dial to
change the parameter.
Sets the Main voice Volume. Default is 120.
Setting this higher than 120 can cause some
distortion on the speakers.
18
Tuning, Transpose, and Main Octave
These settings are also on Main Setting Page
1. You can change parameters for the Tuning,
Transpose, and the Main Octave by selecting
the setting you want with the page buttons
to adjust and turning the Value dial to change
the parameters.
Tune - Default is 440
Transpose - Default is 0.
Main Octave - Default is 0.
Metronome Time Signature, and Tempo
Press the Metronome button to turn on the
metronome. The LED will flash. You will hear the
click in headphones or speakers.
Press the Metronome button again to exit
metronome function. The LED will turn off.
To Change Metronome Time Signature:
Press the FUNCTION button.
On Main Setting Page 1 you can change
parameters for the Metronome such as
the time signature, volume and tempo
settings by selecting the setting you
want with the page buttons to adjust
and turning the Value dial to change the
parameters.
Time Signature - The default is 4/4 and the
following options are available to toggle
through: 1/4, 2/4, 3/4, 4/4, 5/4, 6/4, 3/8, 6/8,
7/8, 9/8, and 12/8.
Tempo - Default is 118BPM (beats per minute)
Metronome Volume - Default is 100
O W N E R ' S MAN UAL