Advertisement
Check the Package Contents
Tools required: phillips screwdriver
Assembly
Laying the Pedal Cable
Take off the cable slot cover. Lay in
the pedal cable from the pedal crossbar,
then insert the cover.
Cross Bar Installation
Attach the pedal crossbar to the leg
with the M6X20 screws.
Ten M6X20 screws
Four M6X15 screws
Two 4X12 self-tapping screws
Six 4X16 self-tapping screws
Advertisement
Table of Contents
Related Manuals for Williams Symphony
Summary of Contents for Williams Symphony
- Page 1 Check the Package Contents Tools required: phillips screwdriver Ten M6X20 screws Four M6X15 screws Assembly Laying the Pedal Cable Take off the cable slot cover. Lay in the pedal cable from the pedal crossbar, then insert the cover. Cross Bar Installation Attach the pedal crossbar to the leg with the M6X20 screws.
- Page 2 Backboard Installation Attach the back board to the legs with M6X15 and 4X16 screws. Headphone Final Installation Holder Place the piano body on the assembled stand and attach it with the M6x20 screws. Install the headphone holder in the proper location with the screw 4X12. Plug the pedal connector into the socket on the bottom.
Need help?
Do you have a question about the Symphony and is the answer not in the manual?
Questions and answers