Table of Contents
Advertisement
C M L 1 2 S D P 2 5 6
This vector initialization should remain after debug when auto start will be applied for
launching the user's application. Note that the user interrupt service routines must be located
in the $4000 - $7FFF address range for correct operation. See Autostart for more details.
MON12 and NOICE Memory Map
ADDRESS
TYPE MEMORY
$C000 -
FLASH
$FFFF
$8000 -
External Ram
$BFFF
$4000 -
External Ram
$7FFF
$3F8C -
Internal Ram
$3FFD
$3E00 -
Internal Ram
$3F8B
$1000 -
Internal Ram
$3DFF
$0400 -
Internal EEprom
$0FEB
$0000 -
HCS12
$03FF
Registers
NOICE OPERATION
NOICE is a development software provided by www.NOICEdebugger.com. NOICE provides a
development environment that is supported by the NOICE host PC software.
development environment has the capability to provide symbolic debug for C source codes
and compilers for a low cost. A fully functional software version is available on the support
CD that will operate in demonstration mode. The user should register the software and
download the latest version from the above web site to get full support. See the NOICE
documentation for details.
MEMORY APPLICATION
MON12, NOICE, and Utility firmware located in internal
flash, Page $3F.
User Paged Program Memory space, pages $20 - $2E.
Note: Pages $30 - $3F reside in the internal flash.
User Program Memory, emulate fixed page $3E.
Ram Interrupt Vector Table
Monitor reserved ram memory. Stacks and variables.
User Internal Ram memory
User EEprom memory, Monitor reserves $FEC - $FEF for
Autostart, user should avoid $FF0 - $FFF memory use.
Monitor or user access to control registers.
11
0 7 / 1 7 / 0 2
This
Advertisement
Table of Contents
