Table of Contents
Advertisement
3- : Mechanism sensor information
[Common table of MN* and HD*]
Mechanism sensor informatio n
Display
Start sensor
REC safety SW
0-
Tab broken
1-
Tab broken
2-
Tab broken
3-
Tab broken
4-
Tab present
5-
Tab present
6-
Tab present
7-
Tab present
8-
Tab broken
9-
Tab broken
A-
Tab broken
B-
Tab broken
C-
Tab present
D-
Tab present
E-
Tab present
F-
Tab present
Tab broken = 0
Tab present = 1
-4 : Mechanism mode position
[Common table of MN* and HD*]
Mechanism
Dis-
sensor
play
information
-0
-1
EJECT
-2
EJECT-EJECT1
-3
EJECT1
-4
EJECT1-EJECT2
-5
EJECT2
-6
EJECT2-ULSTOP Intermodal position
-7
ULSTOP
Even number
-8
ULSTOP-UPPER
(0, 2, 4, 6, 8,
-9
UPPER
A, C, E)
-A
UPPER-ONSTOP Intermodal position
-B
ONSTOP
-C PLAY-FWD/SS
-D FWD/SS
-E
FWD/SS-REV
-F
REV
-0
REV-OFFSTOP
-1
OFFSTOP
Odd number
-2
OFFSTOP-FFREWB Intermodal position
(1, 3, 5, 7, 9,
-3
FFREWB
B, D, F)
-4
FFREWB-FFREW Intermodal position
-5
FFREW
2.3.6 EMG detail information <2>
The type of the cassette tape and the cassette tape winding po-
sition can be confirmed based on the figure in EMG detail infor-
mation <2> .
Note:
• EMG detail information <2> is the reference information
stored using the remaining tape detection function of
the cassette tape. As a result, it may not identify cas-
sette correctly when a special cassette tape is used or
when the tape has variable thickness.
1-12 (No.82992)
Mechansim
End sensor
position sensor
ON
ON
ON
ON
ON
OFF
ON
OFF
ON
ON
OFF
OFF
ON
OFF
ON
OFF
ON
OFF
OFF
OFF
ON
OFF
OFF
OFF
ON
ON
ON
ON
ON
OFF
ON
OFF
ON
OFF
ON
OFF
OFF
ON
ON
OFF
ON
OFF
OFF
ON
OFF
OFF
OFF
OFF
Sensor ON = 0
Sensor ON = 0
sensor OFF = 1 Sensor OFF = 1
Deck operation mode
Not established
EJECT position
Intermodal position
EJECT1 position
Intermodal position
EJECT2 position
ULSTOP position
Intermodal position
Loading (unloading) tape
PLAY position
Intermodal position
FWD (FWD Still/Slow) position
Intermodal position
REV (REV Still/Slow) position
Intermodal position
Pinch roller OFF position
FF/REW Brake position
FF/REW position
*5 : Cassette tape type <1>
Display
Cassette tape type <1>
00
Cassette type not identified
16
Large reel/small reel (T-0 to T-15/T-130 to T-210) not classified
82
Small reel, thick tape (T-120) identified/thin tape (T-140) identified
84
Large reel (T-0 to T-60) identified
92
Small reel, thick tape (T-130) identified/thin tape (T-160 to T-210) identified
93
Small reel, thick tape/C cassette (T-0 to T-100/C cassette) not classified
C3
Small reel, thick tape/C cassette (T-0 to T-100/C cassette) being classified
D3
Small reel, thick tape/C cassette (T-0 to T-100/C cassette) being classified
E1
C cassette, thick tape (TC-10 to TC-20) identified
E2
Small reel, thick tape (T-0 to T-100) identified
E9
C cassette, thin tape (TC-30 to TC-40) identified
F1
C cassette, thick tape/thin tape (TC-10 to TC-40) not classified
Notes:
• Cassette tape type <1> is identified a few times during
mode transition and the identification count is variable
depending on the cassette tape type. If an EMG occurs
in the middle of identification, the cassette tape type
may not be able to be identified.
• If other value than those listed in the above table is dis-
played, the cassette tape type is not identified.
*6 : Cassette tape winding position
The cassette tape winding position at the moment of EMG is dis-
played by dividing the entire tape (from the beginning to the end)
in 21 sections using a hex number from "00" to "14".
"00" : End of winding
"14" : Beginning of winding
"FF" :Tape position not identified
*7 : Cassette tape type <2> (Winding area)
Display
Cassette tape type <2>
00
Cassette type not identified
04 - 08
C cassette, thick tape
05 - 06
Small reel, thick tape
05 - 0C
C cassette, thick tape
06 - 0C
C cassette, thin tape
06 - 0C
C cassette, thin tape
07 - 08
Small reel, thick tape
09 - 0B
Small reel, thick tape
0C - 0D
Small reel, thick tape
0D - 0F
Small reel, thick tape
0E - 10
Small reel, thick tape
10 - 12
Small reel, thin tape
10 - 13
Small reel, thick tape
11 - 14
Small reel, thick tape
12 - 14
Small reel, thin tape
13 - 14
Small reel, thin tape
13 - 14
Small reel, thin tape
13 - 14
Small reel, thin tape
13 - 14
Small reel, thick tape
15 - 16
Large reel
16 - 17
Large reel
17 - 18
Large reel
19 - 1B
Large reel
Note:
• The values of cassette tape type <2> in the above table
are typical values with representative cassette tapes.
2.3.7 EMG detail information <3>
Three deck operation modes preceding the deck operation mode
in which the EMG occurs may be confirmed based on the figures
in the EMG information detail <3>. For the contents of the dis-
played information, see the table "Deck operation mode" in sec-
tion "2.3.5 EMG detail information <1>".
(Reference) Word data
(Beginning)
(End)
TC-10
(0497 - 0506) (0732 - 0858)
T-20
(05A9 - 0661)
TC-20P
(0599 - 05FF) (0AA1 - 0C07)
TC-40
(0623 - 063D) (0C41 - 0CC3)
TC-30
(0611 - 0638) (0C0C - 0CB2)
T-40
(07CC - 08E5)
T-60
(09FD - 0B78)
T-80(DF-160)
(0C20 - 0DFC)
T-90(DF-180)
(0D31 - 0F3E)
T-100
(0E43 - 107F)
T-140
(10E1 - 120C)
T-120(DF-240)
(1073 - 1313)
T-130
(1185 - 1429)
T-160
(12D3 - 141F)
T-210(DF-420)
(1373 - 14C3)
T-180(DF-360)
(1357 - 14C0)
T-168
(1395 - 14EE)
DF-300
(13A8 - 14CE)
T-20
(1536 - 1618)
T-30
(1647 - 175A)
T-40
(1759 - 189C)
T-60
(1989 - 1B2F)
Advertisement
Table of Contents
