Advertisement
2. Make sure that you released the triggers
3. Pull the lock lever (8) out and rotate the rear handle
(Figure 9c)
4. Release the lock lever and ensure that it is fully
locked in before operating the hedge trimmer.
USING THE HEDGESWEEP™ DEBRIS SWEEPER
WARNING:
Make sure that you disconnect the hedge
trimmer from the power supply before attaching
or removing the HedgeSweep™ debris sweeper.
To avoid clippings and other debris to fall back into the
hedge while cutting you can use the HedgeSweep™
debris sweeper (included in RHT600RL) to sweep
the cuttings off the hedge. You can attach the
HedgeSweep™ debris sweeper by sliding it onto the
rail as shown in Figure 2. The sloped end of it should
be facing the motor housing of the hedge trimmer. To
remove HedgeSweep™ just pull it towards the open end
of the blade.
If desired. You can use a string to help cut your hedge
level. Decide how high you want the hedge. Then stretch
a piece of string along the hedge at this height. Trim the
hedge just above this guide line of string. See Figure
5.Trim the side of a hedge so that it will be slightly
narrower at the top. See Figure 6.More of the hedge will
be exposed when shaped this way, and it will be more
uniform.
STARTING AND STOPPING
Starting:
Press and hold rear trigger (5) and squeeze front trigger
(4)
Stopping:
Release any of switch levers (4) and (5)
MAINTENANCE
WARNING:
Before inspecting, cleaning, or servicing the
machine, disconnect the plug from power source
and wait for all moving parts to stop. Failure to
follow these instructions can result in serious
personal injury or property damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken, or destroy plastic which may
result in serious personal injury.
ENGLISH (Original Instructions)
WARNING:
Blades are sharp. When handling the blade
assembly, wear non-slip, heavy-duty protective
gloves. Do not place your hand or fingers
between blades or in any position where they
could get pinched or cut. NEVER touch blades or
service unit with the power supply connected.
BLADE MAINTENANCE
Always clean the cutting blades after operation and
n
lubricate as described later in this manual.
Perform regular visual checks/inspection on the
n
cutting edges of the blade and check the tightness of
the blade bolts.
LUBRICATING THE BLADE
For easier operation and longer blade life, lubricate the
hedge trimmer blade before and after each use.
Stop the motor and disconnect from power supply.
n
Lay the hedge trimmer on a flat surface. Apply light
n
weight machine oil along the edge of the top blade.
If you will be using the hedge trimmer for an extended
period, it is advisable to oil the blade during use. See
Figure 7
CLEANING THE HEDGE TRIMMER
Stop the motor and disconnect from power supply.
n
Clean dirt and debris from the body of the hedge
n
trimmer, using a damp cloth with a mild detergent.
NOTE: Do not use any strong detergents on the
plastic housing or the handle. They can be damaged
by certain aromatic oils such as pine and lemon, and
by solvents such as kerosene.
STORING THE HEDGE TRIMMER
Clean all foreign material from the product.
n
Always place scabbard on cutting blades before
n
storing. See Figure 8.
Store it in a well-ventilated place that is inaccessible
n
to children.
Keep away from corrosive agents such as garden
n
chemicals and de-icing salts.
DISPOSAL
This marking indicates that this product
should not be disposed with other household
wastes throughout the EU. To prevent
possible harm to the environment or human
health from uncontrolled waste disposal,
recycle it responsibly to promote the
sustainable reuse of material resources. To
return your used device, please use the
return and collection systems or contact the
retailer where the product was purchased.
They can take this product for environmental
safe recycling.
5
Advertisement
