Page 1
ポ ー タ ブ ル ヘ ッ ド ホ ン ア ン プ Headphone Amp / USB DAC / iDevice DAC / DD コンバーター アシンクロナスモード、ASIO 、24bit/192kHz 対応 On the Go or In Your Stereo エックスワン 取扱説明書 User manual...
各部の名称と機能 フロントパネル ⑤ ① ② ④ ③ Power on/off Level 1 / 2 Line in TRRS Analog out ① ヘッドホン出力 -1 (4-pin):3.5mm のヘッドホンジャック差込用 、又はアナログ出力用。。 ② ライン入力 (4-pin) switched:3.5mm のステレオミニジャック差込用で、アナログ入力が可能。 ③ ボリューム:電源 ON/OFF を兼ね備えたロータリータイプのボリュームコントロール。右に回すと ヘッドホン出力のボリュームが上がり、左に回すとボリュームが下がります。 ④ パワーインジケーター:赤と緑と橙の LED ライト。 赤色点灯 = 充電中 / 緑色点灯 = 充電残 量多い / 橙色点灯...
① USB DAC でのご使用(PC/Mac 接続):再生中のサンプリングレート 44.1/ 48/ 88.2/ 96/ 176.4/ 192 KHz に該当するサンプリング周波数のインジケーターが点灯します。( この機能は USB DAC でのご使用時に限ります。) ② iTunes をご使用の場合 -1・・・ ADL X1 の LED インジケーターは PC あるいは Mac の再生サン プリングレート設定に従ってインジケーターが点灯します。 ( 44.1/ 48/ 88.2/ 96/ 176.4/ 192kHz サンプリングレートに対応しています。) ③ iTunes をご使用の場合 -2・・・Windows XP の場合は再生サンプリングレートの設定はできませ...
本機の電源 本機の電源は内蔵リチウムイオン電池です。この電池は付属の USB ケーブル ( A to mini-B)をパソコンと本機につなげることでバスパワーによる充電をすることができます。 お買い上げ時は電池が十分に充電されておりません。ご使用前にあらかじめ充電することをお勧め します。また、充電中の状態での給電も可能です。 内蔵電池を充電する ① パソコンの USB 端子と本機の DC-IN 端子を付属の USB ケーブル (A to mini-B タイプ ) を使っ て接続する。 ② AC/DC スイッチングアダプター(別売)経由にて USB 端子を本機の DC-IN 端子に接続する。 内蔵されているリチウムイオン電池の充電が行われます。 本機の電源がオフの状態でも充電が行われます。 充電中は、リアパネルのインジケーターが赤色に点灯し、 充電が完了すると緑色に点灯します。 充電残量が少なくなると、フロントパネルのパワーインジ ケーターが橙色に点灯します。 ( リア) ①...
※ Mac をお使いの場合、ドライバーのインストールは不要です。 Windows の場合、標準ドライバー のインストールが必要になります。(アシンクロナスモード、ASIO 対応) ※ヘッドホンジャックを本機から外してしまうと音は流れません。 ※パソコンの OS は、Windows XP 以上、Mac OS X 以上を推奨します。 ※ USB2.0 対応の USB ポートを標準装備したパソコンを本機に接続することが出来ます。 ※ボトムパネル入力切替スイッチ (i デバイス /USB DAC) : USB iDevice DAC (PC 或は MAC) 入力の切替をしてください。 (切替時は ADL X1 の再起動が必要です。) by FURUTECH USB DAC...
パソコンの詳細設定 Window 7 ① コントロールパネルから「ハードウェアと サウンド」を選択します。 ② 「サウンド」を選択し、「サウンド」画面を開 きます。 ③ 「再生」タブを選択します。 ④ 再生デバイスとして「ADL X1」を選択し「規 定値に設定」ボタンをクリックし、「OK」ボ タンをクリックします。 MAC OS ① アップルメニューから「システム環境設定」 を選択します。 ② 「サウンド」項目を選択して「サウンド」画 面を開き、画面上の出力タブを選択し、さ らに「サウンドを出力する装置の選択」リ ストから「ADL X1」を選択します。...
Page 14
スペック ■ 電源 ON/OFF を兼ね備えた高性能ボリュームコントロール ■ すべての 3.5mm 入出力端子、及び i デバイス用 USB A Type 入力端子、USB-miniB 端子は金 メッキ仕様。 ■ PC との USB 接続や、電源アダプター(別売)経由にて本機を充電。 充電時間 : 約 7 時間 ( DC 5V , 0.5A USB のバスパワーによる充電。) 充電時間 : 約 4 ~ 5 時間。( AC/DC 5V, 1.0 ~ 2.0A スイッチングアダプター(別売)による充電。) ■...
Page 16
To reduce the risk of electric shock do not disassemble or attempt to repair the ADL X1; take it to a qualified service technician for examination and repair. Incor- rect reassembly or repair could cause a risk of fire, electric shock, or injury when the ADL X1 is used.
Page 17
ADL headphone amplifier. ■ Make sure the volume control is set to its lowest level (turn to left). ※Turning on your ADL headphone amplifier with the volume control set at a high level could damage hearing. ■ Each time when powering on ADL headphone amplifier it is recommended that the volume be set at its lowest level (turn to left) and then volume adjusted to the appropriate listening level after that.
Page 18
User manual contents Driver Specifications Operating environment condition ・・・・・・・・・・・・・・・・・・・・・ Included with the Headphone AMP ADL X1 Features How to use ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Functions and Part names Front Panel Rear Panel・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Top Panel ( LED Indicator ) Bottom Panel・・・・・・・・・・・・・・・・・・・・・・・・・・・ Connectivity ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ Computer settings for ADL X1 headphone amplifier Computer Requirements / Window 7 / MAC OS ・・・・・・・...
Page 19
Driver: No drivers are necessary with Mac computers, while a single standard driver is required for Windows computers. ※ please download driver from the ADL X1 product page on www.adl-av.com Specifications • High-quality volume control and On/Off switch (front) • Gold-plated 3.5mm input phone jack : analog line input (switched) •...
Page 20
Silicon elastic band for stacking players with the ADL X1 ⑤ Li-ion Type DC 3.7V 2600mAh Rechargeable Battery (internal) ⑥ ※ For replacement of the internal battery, please contact the ADL dealership from where the ADL headphone amplifier was purchased or your local ADL distributor. Features •...
Page 21
Function and Part names: Front Controls and Indicators ⑤ ① ② ④ ③ Power on/off Level 1 / 2 TRRS Analog out Line in Headphone and Analog out-1 (4-pin): 3.5mm phone jack for headphones output ① Line input (4-pin): 3.5mm phone jack (switched) for analog source input ②...
Page 22
USB DAC • Input Selection: Switchable between USB A socket or USB Mini-B socket (USB-A socket for iOS or USB miniB socket for PCs) ※ (Switch must be reset after each selection, simply switch the ADL X1 on and off)
Page 23
Connectivity Connection with portable audio devices ② ① Power on/off Level 1 / 2 TRRS Analog out Line in (front) GND TRRS Switch: Switchable to match different 4-pin headphone types (SONY or APPLE) Analog out <-> Headphone (3.5mm phone jack) ①...
Page 24
Close the “Sound” application ⑤ ※ Driver: No drivers are necessary with Mac computers, while a single standard driver is required for Windows computers. ※please download driver from the ADL X1 product page on www.adl-av.com MAC OS Select “Sound” from the ①...
Page 25
LIMITED WARRANTY MODEL No. ADL X1 This product is made of high quality materials and great care has been taken in its manufacture. It is designed to give good performance provided it is properly operated and maintained. This product is sold subject to the understanding that if...
Page 27
MFi licensed and certified Made for • iPod touch (4th generation) • iPod classic • iPod nano (6th generation) • iPhone 4S • iPhone 4 • iPhone 3GS • iPad (3rd generation) • iPad 2 • iPad “Made for iPod, ” “Made for iPhone, ” and “Made for iPad” mean that an electronic acces- sory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards.
Need help?
Do you have a question about the X1 and is the answer not in the manual?
Questions and answers