Table of Contents
Advertisement
Charging the Battery Pack
4
3
3
Attach the battery pack to the camcorder.
• Press the battery pack softly into the battery attachment unit and
slide it up until it clicks in place.
4
Charging will start when the camcorder is turned off.
• If the camcorder was on, the green POWER/CHG indicator will
go out when you turn off the camcorder. After a moment, the
POWER/CHG indicator will turn on in red (battery pack charging).
The red POWER/CHG indicator will go out when the battery
pack is fully charged.
• If the indicator flashes, refer to
• Fully charging the supplied battery pack will take approximately
7 hours and 45 minutes.
To remove the battery pack
1
Slide d in the direction of the arrow and hold
it pressed down.
2
Slide the battery pack and then pull it out.
3
Troubleshooting
26
4
(A 255).
Advertisement
Table of Contents
