Table of Contents
Advertisement
To re-image the storage blades, perform the steps in the following sections for each blade.
Verify minimum server requirements
1.
Log in to iLO for the storage blade.
2.
Boot the storage blade from the DVD.
3.
Select the F10 Intelligent Provisioning option after the RAID controller BIOS initialization.
4.
Select a language.
5.
Accept the HP End User License Agreement.
6.
Select Maintenance.
7.
Select HP Insight Diagnostics.
8.
On the System Survey tab, verify that the specified items in the Overview category (default)
meet the minimum requirements listed in
CAUTION:
(page
16), do not continue with this procedure.
Table 2 Minimum requirements, overview category
Item
CPU on the storage blade
Type and number of drives
Memory
NIC
9.
From the Categories list, select Storage.
10.
Verify that the specified item meets the minimum requirements listed in
Table 3 Minimum requirements, storage category
Item
Array Controller in Slot 0: HP Smart Array P220i
controller
Array Controller in Slot 2: HP Smart Array P721m
controller
Run server diagnostics
1.
On the HP Insight Diagnostics Test tab, select Quick Test and specify the number of loops.
16
Maintaining the HP 4630 system
If any items do not meet the requirements listed in
Table 2 (page
16).
Table 2 (page 16)
Minimum requirement
Intel Xeon Processor E5-2620 @ 2.00GHz
27 hard drives, which include the following:
Slot 2: 25 drives on the HP Smart Array P721m
controller
Slot 0: 2 drives on the HP Smart Array P220i
controller
64 GB
HP FlexFabric 10Gb 2-port 554FLB Adapter (appears
as OneConnect 10Gb NIC (be3) in the CMC)
Minimum requirement
Model: HP P220i
Firmware: 3.60 or later
Installed Memory: 512 MB
Battery/Capacitor Present: Yes
BIOS boot device order: 1
Model: HP P721m
Firmware: 3.60 or later
Installed Memory: 2 GB
Battery/Capacitor Present: Yes
BIOS boot device order: 2
and
Table 3
Table 3 (page
16).
Advertisement
Table of Contents
