Lionel Area 51 RS-3 Owner's Manual page 12

Operating your train set
Running your train set
With track power unplugged, place your train set on the track.
1
Refer to the following section for information on coupling the cars.
Plug in your wall-pack power supply, connect
2
it to the track, and switch on the remote.
Move 'em out!
3
Use your remote to run your train. You can adjust the speed
in forward or reverse, blow the horn, sound the bell, or trigger an
announcement. Refer to page 13 for complete details.
Unplug the wall-pack power supply when you are done running
4
your trains.
Switch off your remote control to conserve the batteries.
12