Electrical Connection - Zanussi ZFG06400WA User Manual

Electrical connection

Caution!
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Warning!
This appliance must be earthed.
5
Important!
The wires in the mains lead are colored in
accordance with the following code
Green and Yellow: Earth
1
Brown:
3
Blue:
5
As the colours of the wires in the mains lead
of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
www.zanussi.com
2
3
4
Live
Neutral
1. Connect the wire coloured green and
yellow to the terminal marked either with
the letter "E" or by the earth symbol
or coloured green and yellow.
2. Connect the wire coloured blue to the
termi-nal either marked with the letter "N"
or col-oured black.
3. Connect the wire coloured brown to the
ter-minal either marked with the "L" or
colour-ed red.
4. Check that no cut, or stray strands of
wire is present and the cord clamp
secure over the outer sheath.
5. Make sure the electricity supply voltage
is the same as that indicated on the
appliance rating plate.
6. Switch on the appliance.
The appliance is supplied with a 13 amp plug
fitted . In the event of having to change
the fuse in the plug supplied, a 13 amp ASTA
approved (BS 1362) fuse must be used.
Warning!
A cut off plug inserted into a 13 amp socket
is a serious safety
is
11 11
EN HR
11