Standby Display Reminder
In standby mode, depending on the current network service
acquired, the display indicates its current network coverage by a
combination of icons and text messages.
While roaming, the "R" icon is displayed on the status bar in standby
mode and the text Analog Roam or Digital Roam appears on the
display screen.
Call Timer
If the handset is roaming when it is in use, the call timer will be
prefixed by Roam instead of Time.
Escape from "Zone of Silence"
E911 calls (as indicated by the digits entered) will be originated in
"zone of silence" via the next available analog system after only one
unsuccessful silent retry cycle, even though the handset's mode may
be set to Sprint Only.
You do not need to press N to confirm call origination and there
will not be any delay or audio prompt confirmation.
Emergency Callback Mode
The handset will support an emergency callback mode where it will
stay in the system from which an emergency call has been placed.
It will not initiate any search for more preferred systems (if Sprint
PCS system has not been acquired) until E911 Callback Mode is
exited.
The textual label Press * and # to exit from Emergency Callback
mode will appear on the display.
Section 2: Understanding Your PCS Phone
73 Section 2D: Controlling Your Roaming Experience