Turning Your Phone On And Off; Power-Save Mode - Motorola SPRINT V60V User Manual

Turning Your Phone On and Off

Turning Your Phone On
To turn your phone on, press O for approximately three
seconds.
While your phone is powering on, you will hear the startup tone
and see the Sprint logo on your External or Main display (depending
on whether the flip is open or closed). When your phone finds a
signal, it automatically enters standby mode - the phone's idle state.
At this point, you are ready to make and receive calls.
If your phone is off the enhanced Sprint Nationwide PCS Network,
you will see the appropriate Roaming icon on the display screen. For
more information about Roaming, please see Section 2D,
"Controlling Roaming Charges Using Call Guard" on page 72.
If necessary, enter your four-digit lock code and press K.
Tip: If you can't recall your lock code, try using the last four digits of either
your Social Security number or PCS Phone Number or try 0000. If none of
these work, call PCS Customer Solutions at 1-888-211-4PCS (4727).
Turning Your Phone Off
Press O until the powering down animation displays.
You will see Powering Off and Goodbye on the display screen before
your phone turns off. If you release the power button before you see
these messages, your phone will not power off.
Note: The start-up and power-down tones may be turned ON or OFF through
the Settings menu (default is ON). Please see page 46.

Power-Save Mode

If your phone is unable to find a signal after 15 minutes of searching,
a Power Save feature is automatically activated. In Power Save mode,
your phone searches for a signal every 3 minutes. You can also
initiate a search for PCS Service by pressing any key (when your
phone is turned on). When a signal is found, your phone
automatically returns to standby mode.
Section 2: Understanding Your PCS Phone
15 Section 2A: Your PCS Phone: The Basics