Custom Function Settings - Canon EOS 80D Instruction Manual

Custom Function SettingsN
3
C.Fn I: Exposure
C.Fn I -1
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. This is
effective when you prefer to control the exposure in less fine
increments than 1/3-stop increments.
When [1: 1/2-stop] is set, the exposure level will be displayed in the
viewfinder and on the LCD panel as shown below.
C.Fn I -2
0: 1/3-stop
You can set the ISO speed manually in 1/3-stop increments.
1: 1-stop
You can set the ISO speed manually in 1-stop increments.
Even if [1: 1-stop] is set, ISO speed will be automatically set in 1/3-stop
increments when ISO Auto is set.
C.Fn I -3
0: On
When you set the power switch to <2>, the AEB and white
balance bracketing settings will be canceled. AEB will also be
canceled when the flash is ready to fire or if you switch to movie
shooting.
1: Off
The AEB and white balance bracketing settings will not be
canceled even if you set the power switch to <2>. (If the flash
is ready to fire or if you switch to movie shooting, AEB will be
canceled temporarily, but the AEB range will be retained.)
Exposure level increments
ISO speed setting increments
Bracketing auto cancel
413