Onkyo TX-NR646 User Manual page 70

Video Select
Setting Item Default Value
Video Select Last
● The setting cannot be changed when input other than "TUNER", "NET" or "BLUETOOTH" is selected.
● When input is "NET" or "BLUETOOTH", switch between displaying and not displaying video by
pressing MODE on the remote controller.
5� Listening Mode Preset
You can preset your favorite listening mode to each input. (For example, you can always
apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play it in unchanged
sound field.)
When the list of input sources is displayed, set the signal type and listening mode.
Although it is possible to select the listening mode during playback, the selected mode will
be reset when the unit enters standby mode.
Setting Item Default Value
Analog/PCM Last Valid
Mono/Multiplex Last Valid
2 ch Source Last Valid
Dolby D/Dolby D+/ Last Valid
TrueHD
En-38
Setting Details
Select the video input played along with
audio output when either "TUNER", "NET" or
"BLUETOOTH" is selected.
● This setting is effective only for an input
selector which is assigned in "HDMI Input" or
"Video Input".
"Last": Select the video input played immediately
prior.
"BD/DVD", "CBL/SAT", "STRM BOX", "PC",
"GAME", "AUX", "CD", "PHONO", "TV": Play the
video from the selected input.
Setting Details
Set the listening mode for playing PCM signals
of CD and analog signals of record and cassette
tape.
Set the listening mode for playing Dolby Digital
and other digital signals recorded in monaural or
multiplex audio.
Set the listening mode for playing Dolby Digital
and other digital signals recorded in 2 channels.
Set the listening mode for playing Dolby Digital,
Dolby Digital Plus and Dolby TrueHD signals.
Setting Item Default Value
DTS/DTS-ES/ Last Valid
DTS-HD
Other Multich Source Last Valid
● Available listening modes vary depending on the input signal.
● Setting "Last Valid" will always select the last selected mode.
● Only "Analog" can be set to the "TUNER" input.
● "Digital" and "TrueHD" can be set to the "NET" input.
● Only "Digital" can be set to the "BLUETOOTH" input.
Advanced Settings (Setup Menu)
Setting Details
Set the listening mode for playing digital audio
signals in DTS and DTS-HD High Resolution
formats. Select the listening mode specified for
Blu-ray or such other DTS-HD Master Audio
source.
Set the listening mode for playing DSD signals
of DVD-Audio and Super Audio CD that are input
from HDMI IN jack.