Setting The Auto Audio Mix Function; Setting The Rear View Camera; Setting The Safe Mode; Setting The Demo Mode - Pioneer AVH-X7850BT Owner's Manual

Table of Contents

Advertisement

Available languages

Available languages

System settings
Setting the auto audio mix
function
You can select whether or not to use the auto audio mix function.
The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
34
2 Touch [Auto Mix] to switch "On" or "Off".

Setting the rear view camera

A separately sold rear view camera (e.g. ND-BC8) is required
for utilising the rear view camera function. (For details, consult
your dealer.)
Rear view camera
This product features a function that automatically switches to
the full-screen image of the rear view camera installed on your
vehicle, when the gearstick is in the REVERSE (R) position.
Camera for Camera View mode
Camera View mode also allows you to check what is behind you
while driving.
To display the camera image, touch [Camera View] on the "AV
source selection" screen.
 Refer to Source on the AV source selection screen on page
12
p To set the rear view camera as the camera for Camera View
mode, set "Back Camera Input" to "On".
 Refer to Setting rear view camera activation on page 35
CAUTION
Pioneer recommends the use of a camera which outputs
mirror reversed images, otherwise the screen image may
appear reversed.
p Immediately verify whether the display changes to a
rear view camera image when the gearstick is moved to
REVERSE (R) from another position.
p When the screen changes to full-screen rear view camera
image during normal driving, switch to the opposite setting
in "Camera Polarity".
p If you touch
while the camera image is displayed, the
displayed image will turn off temporarily.
Setting rear view camera activation
The default setting is "Off".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
34
2 Touch [Camera settings].
3 Touch [Back Camera Input] to switch "On" or
"Off".
Setting the polarity of the rear view
camera
p This function is available when "Back Camera Input" is
"On".
 Refer to Setting rear view camera activation on page 35
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
34
2 Touch [Camera settings].
3 Touch [Camera Polarity].
Battery (default):
The polarity of the connected lead is positive.
Ground:
The polarity of the connected lead is negative.

Setting the safe mode

You can set the safe mode that regulate operating some func-
tions only when you stop your vehicle in a safe place and apply
the handbrake.
The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
34
2 Touch [Safe Mode] to switch "On" or "Off".

Setting the demo mode

The default setting is "On".
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
34
2 Touch [Demo Mode] to switch "On" or "Off".

Selecting the system language

If the embedded language and the selected language setting
are not the same, text information may not display properly.
Some characters may not be displayed properly.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
34
2 Touch [System Language].
3 Touch the language.
After the language is selected, the previous screen returns.
Setting the keyboard language
with the application for iPhone
You can use the keyboard in AppRadioMode by setting the
language of the keyboard for iPhone.
p This function is only available in AppRadioMode on the
iPhone.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
34
2 Touch [Keyboard].
3 Touch the language.
After the language is selected, the previous screen returns.
Adjusting the response posi-
tions of the touch panel (touch
panel calibration)
If you feel that the touch panel keys on the screen deviate from
the actual positions that respond to your touch, adjust the
response positions of the touch panel screen.
p This setting is available only when you stop your vehicle in a
safe place and apply the handbrake.
p Do not use sharp pointed tools such as a ballpoint or
mechanical pen, which could damage the screen.
p Do not turn off the engine while saving the adjusted position
data.
1 Display the "System" setting screen.
 Refer to Displaying the "System" setting screen on page
34
2 Touch [Touch panel calibration].
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avh-x6850dvd

Table of Contents