Polaris 600 PRO-RMK Owner's Manual page 74

THE PERFECT FIT
Handlebar Component Fastener Torques
1
IMPORTANT: Moving a handlebar component without first loosening its
screws/set screws may cut grooves into the handlebar, making it difficult
to secure the component. Do not move a handlebar component without
first loosening its mounting screws/set screws.
Take care to avoid damaging hand warmer/brake switch wires when
moving components.
1.
Brake Lever / Master Cylinder
2. Auxiliary Engine Stop Switch Set Screw
3. Handlebar Hook Screw
4. Throttle Lever Block Set Screw
5. Throttle Lever Block Cover Screws
6. Handlebar Clamp Screws/Bolts
7. PERC Button Screw
Hand Guard Mounts (if applicable)
72
6
7
Component
2
4/5
Torque
Do not over-tighten
60-80 in-lbs (6.7-9 Nm)
12 in-lbs (1.4 Nm)
Aluminum: 10 ft-lbs (13.5 Nm)
Steel: 18 ft-lbs (24 Nm)
27 in-lbs (3 Nm)
6 in-lbs (0.7 Nm)
7 ft-lbs (9.5 Nm)
35 in-lbs (4 Nm)
Hand-Tight
3