Features - Polaris 600 PRO-RMK Owner's Manual

FEATURES

Standard Instrument Cluster
Rider Information Center
Security System (Ignition Lock System)
Changing to a New Security Code
Any time you wish to change your current security code to a new code,
perform TASK 2 through TASK 4 of the First Time Use of Your
Security System procedure beginning on page 56. Instead of using the
factory default code "000" in TASK 2 and TASK 3, use your current
security code.
Security System Access Quick Reference
Now that you have become familiar with the procedure for locking and
unlocking the system, use the chart below as a quick reference.
Security System Access Quick Reference Chart
Action
Start engine + Lock
parking brake + Press
and hold both MODE +
SELECT (SEL)
Press SELECT (SEL)
Press MODE
60
Result
Displays ENTER CODE (to lock the system)
Advances a digit on the ENTER CODE screen
Accepts a digit and displays the next digit position (if
any remain) on the ENTER CODE screen
or
Opens ENTER CODE screen if MODE is pressed
immediately after locking and unlocking the system
(to change your security code)