Features - Polaris 600 PRO-RMK Owner's Manual

Tools
4. Pull the container out of the compartment.
5. When placing a drive belt into the container, fold the belt as shown.
Verify that the belt loop at the rear of the container is positioned
slightly higher than the front loop.
6. Slide the container into the engine
compartment at an angle.
7. Position the container bracket
onto the bumper tube and rotate it
downward.
8. Reinstall the spark plug wrench
into the bracket and through the
hole in the bumper tube.
9. Rotate the spark plug wrench
clockwise until it locks into place.
Front
Step 4

FEATURES

Rear
Step 5
Step 6
39