Sharp LC-26SH7E/RU Service Manual page 41

Note:
1. Use Minolta CA-210 for color coordinates and luminance check.
2. Befor checking,all colour analyzers (CA-210) should be coordinates with a same reference TV set.
3. Check the luminance in the center of the screen with 100% White when Brightness control at 100; Contrast control at 100
2
Luminance > 230 cd/m << For 19" only at color temp.- warm mode >>
2
> 350 cd/m << For 26" only at color temp.- cool mode >>
2
> 400 cd/m << Foolor temp.- cool mode >>
3. Factory mode preset.
Default Values
VIRGIN_MODE
GAMMA_TABLE
COLOR_ENHANCE
Note: VIRGIN_MODE is ON for outging and is Off at production line.
ADC_GAIN_R
ADC_GAIN_G
ADC_GAIN_B
ADC_OFFSET_R
ADC_OFFSET_G
ADC_OFFSET_B
Note: These above values will be changed after doing "AUTO_COLOR" at FAC mode menu.
NORMAL
CLR_TEMP_R 0
CLR_TEMP_G 0
CLR_TEMP_B 0
Note: These above values will be changed after doing W/D alignment at FAC mode menu
TUNER_ID 4 (Panasonic ENG37E14KRF)
PANEL_ID 110: for CMO 19" panel
These above values are defined by Development Division and written in release NVM.
Picture Mode
o
Normal (9000 K)
o
Cool (12000 K)
o
Warm (6500 K)
On
On
YPbPr PC
64 64
64 64
64 64
128 128
128 128
128 128
PC
COOL WARM
0 0
0 0
0 0
122: for CMO 26" panel
2008-03-14
LC-19SH7E/RU, LC-26SH7E/RU, LC-32SH7E/RU, LC-42SH7E/RU
x
0.289±0.015
0.272±0.010
0.314±0.015
Reading with Minolta CA-210.
33: for Sharp 32" panel
41
y
0.291±0.015
0.277±0.010
0.319±0.015