Motorola MPx200 Owner's Manual page 116

5. Connect your Smartphone to the device with which you want to use your Smart-
phone as a modem.
To set up a serial port modem connection
1. Make sure that your Smartphone is not connected to another device.
2. On the Home screen, press the
ries, and then press the Action button.
3. Select Modem Link, and then press the Action button.
4. Under Connection, select
and then press the Action button.
Note: The default baud rate is set for 115,200. Do not change this default unless the
port speed of the Smartphone or computer requires you to do so.
To activate the Modem Link
1. On the Home screen, press the
ries, and then press the Action button.
2. Select Modem Link, and then press the Action button.
3. Press the Menu
4. Align the Smartphone's infrared (IR) port or connect the cable to the device.
To deactivate the Modem Link
1. On the Home screen, press the
ries, and then press the Action button.
2. Select Modem Link, and then press the Action button.
3. Press the Menu soft key, select Deactivate, and then press the Action button.
Note: Failing to deactivate the Modem Link when you are finished using it may result in
problems with using ActiveSync in the same session.
116 - Internet, Entertainment, and More
Programs
Serial (COM1), press the
Programs
soft key, select Activate, and then press the Action button.
Programs
soft key, select More, select
Menu soft key, select Activate,
soft key, select More, select
soft key, select More, select
Accesso-
Accesso-
Accesso-